BEL MS64-F Manuals

Installation and User Guide MADI-SWITCH 8x1 MADI SOURCE SELECTOR MS64-F, MS64-C, MS64-FC SEL PSU OUT IN OUT IN OUT IN SIG SEL SIG SEL SIG SEL MS64-C SWITCH MADI MADI-SWITCH User Manual v1.1 2 Bel Digital Audio Limited This document confirms that products bearing the CE label meet all the requirements in the EMC directive 2004/108/EC and LV directive 2006/95/EC laid down by the Member States Council for adjustment of legal requirements. Furthermore the products comply with the rules and regulations from 30 August 1995 referring to the electromagnetic compatibility of devices. Bel Digital Audio MADI-SWITCH units bearing the CE label comply with the following harmonised or national standards: EMC: BS EN 55103-1 :2009 BS EN 55103-2 :2009 Safety: BS EN 60950-1: 2006 (ed. 2) + A1:2010 Insulation: Class1 Instructions for Disposal of WEEE by Users in the European Union The symbol shown here is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a designated collection point for recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product. User’s Notice and disclaimer: No part of this manual may be reproduced, transmitted, transcribed, stored in a database system or translated without the express written permission of Bel Digital Audio Ltd. Documentation kept by the end user for back-up purposes is excluded from the above. All products and corporate names mentioned in this manual may be registered trademarks or copyrights of their respective companies. They are used here for indicative purposes only. The information contained in this manual has been carefully checked for accuracy; however no guarantee is given with respect to its correctness. Bel Digital Audio Ltd. accepts no responsibility or liability for any errors or inaccuracies that may appear in this manual or the products and software described in it. Specifications and information contained in this manual are subject to change at any time without notice. © 2014 Bel Digital Audio Ltd. All rights reserved. This appliance has a serial number located on the rear panel. Please record the serial number here for your records. Model Number…………MADI-SWITCH Serial Number………………………………………... Reference To Statement Of Conformity MADI-SWITCH User Manual v1.1 3 Bel Digital Audio Limited Reference To Statement Of Conformity .............2 Important Safety Instructions ..........................4 Important Safety Precautions .......................... 5 Important Safety Information ........................... 5 Introduction ...................................................6 What’s In The Box ......................................... 6 MADI-SWITCH Main Features ......................... 6 Front Panel Description .................................. 7 Rear Panel Description .................................. 8 Installation ....................................................9 Hardware Considerations ............................... 9 Power Supply Considerations .......................... 9 Fuses And Ratings ...................................... 9 Unit Connections ........................................... 9 Operation ....................................................10 Connection ................................................. 10 Source Selection ......................................... 10 Example Connection Diagram .........................11 Technical Specifications .................................12 Contents MADI-SWITCH User Manual v1.1 4 Bel Digital Audio Limited 1. Read these instructions 2. Keep these instructions 3. Heed all warnings 4. Follow all instructions 5. Do not use this apparatus near water 6. Do not expose this apparatus to rain or moisture. 7. Clean only with a dry cloth 8. Do not block any ventilation openings. Install with accordance with the manufacturer’s instructions. 9. No naked flames, such as lighted candles, should be placed on the apparatus. 10. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 11. There are no user-adjustments, or user- servicable items, inside this apparatus. Do not remove the covers of this apparatus; doing so will invalidate your warranty. 12. Adjustments or alterations to this apparatus may affect the performance such that safety and/or international compliance standards may no longer be met. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. Caution 14. Hazardous voltages may be present inside this apparatus. 15. Do not operate this apparatus with the covers removed. 16. To reduce the risk of electric shock, do not perform any servicing other than that contained in these Installation Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel and ensure that all power cords are disconnected when servicing this apparatus. 17. Only use attachments/accessories specified by the manufacturer. Power Safety 18. This apparatus is fitted with a universal power supply, approved and certified for operation in this apparatus. There are no user-replaceable fuses. 19. An external over-current protection device is required to protect the wiring to this apparatus. This protection device must be installed according to current wiring regulations. In certain countries this function is supplied by use of a fused plug. 20. If an extension power cable or adaptor is used, ensure that the total power rating of the power cable and/or adaptor is not exceeded. 21. An external disconnect device is required for this apparatus; a detachable power cord is a suitable disconnect device. 22. The apparatus should be located close enough to an AC outlet so that you can easily grasp the power cord plug at any time. 23. This apparatus is a Class I construction and shall be connected to an AC outlet with a protective grounding connection. 24. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 25. Unplug this apparatus during lightning storms or when unused for long periods of time. 26. All power cords must be disconnected to isolate this apparatus completely. 27. Caution: To reduce the risk of electric shock, plug each power supply cord into separate branch circuits employing separate service grounds 28. This equipment is not supplied with a detachable power cord. The device should be connected to a power supply only of the type described in the Installation Guide or as marked on the device. The power cord must be earthed and precautions should be made so that the grounding is not defeated. A mains cord, fitted with an IEC 60320 C13 type socket, appropriate sized conductors and plug to suit local electrical requirements. 29. The power supply cord (i.e. conductor, coupler (IEC60320 C13) and plug combination) must be suitably rated for apparatus and the country of use (meeting local electrical requirements). A power supply cord with a rating of not less than 125% of current rating is suitable. The minimum rating for the power supply cord at 110 / 230V AC to be 1A. Important Safety Instructions