Belkin F1PI241ENau Manuals

Congratulations on the purchase of your new modem/router. To make the install process as simple as possible we have pre-confi gured your modem with your username, password and settings so you can easily connect. Please follow the simple steps below to setup your modem. Identify Components You will fi nd the following items in your modem box: VoIP Modem/Router Power Adapter Line Filter Ethernet Cable (blue) Telephone Cable For using VoIP You will also need the following items (not supplied with Modem): Telephone and phone cable Spare Telephone Cable VoIP Broadband Modem Setting up for ADSL and VoIP. For models F1PI241EGau and F1PI241ENau Part One - Set up for ADSL with your VoIP Broadband Modem D C 1 Connect the power adapter into a power outlet. Plug the other end into the “PWR” socket on the modem. Turn your modem on and the power LED will illuminate. other end into the “PWR” socket on the modem. Turn other end into the “PWR” socket on the modem. Turn D other end into the “PWR” socket on the modem. Turn your modem on and the power LED will illuminate. your modem on and the power LED will illuminate. your modem on and the power LED will illuminate. C your modem on and the power LED will illuminate. 2 Connect the supplied line fi lter into a telephone socket. Connect the supplied telephone cable to the Modem and connect the loose end of the cable to the “ADSL” socket in the line fi lter. The ADSL LED will fl ash approximately 6-10 times and then remain solid. Ensure that the online LED is illuminated. If this light is not illuminated and you have followed the above steps, ensure your ADSL line has been activated. Modem and connect the loose end of the cable to Modem and connect the loose end of the cable to A Modem and connect the loose end of the cable to B B A Power LED will illuminate LAN LED will illuminate LAN Ports B Power select Standard phone line ADSL Line Port A Power Switch C PTSN Fail Over F E D Power LED 4 Make sure your computer is turned on and once your operating system is loaded, open your web browser and surf the web. If you are unable to surf the web, follow the troubleshooting steps on the next page. Note for Wireless Users: By default, the wireless feature of your modem is enabled. For help on confi guring security on your wireless network, please see the manual included on the CDROM (applies to Belkin ADSL Wireless Modem only.) 3 Connect the blue Ethernet cable to one of the available “LAN” ports on the Modem. Connect the other end of this cable to the network adapter on your computer. Either Lan 1, 2, 3 or 4 LED will illuminate if you have a successful connection between your PC and modem. Start Here Note: It is recommended that you place a line fi lter on any telephones or fax machines you have around the house. You will be shown how to do this in Part Two of this guide. Continued Please note: Model F1PI241ENau used in this setup guide. Same steps apply for model F1PI241EGau

© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. 54g is a trademark of Broadcom Corporation in the United States and/or other countries. Mac, Mac OS, AppleTalk, Apple, and AirPort are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. The mark Wi-Fi is a registered mark of the Wi-Fi Alliance. P75000au-A User Manual Broadband Voice Modem/Router ADSL2+ Modem