Bellman & Symfon BE2021 Maxi Pro Manuals

Adjusting the volume Press on the volume controls (6) to increase the volume and to decrease it. The microphone volume can be adjusted in 9 steps and the TV and mobile phone volume in 15 steps. The level is shown in the volume/ tone indicator (5). Note: Every time you turn on Maxi, the volume is set to low to avoid unpleasant sound levels. Adjusting the tone Press the on the tone controls (7) to increase the treble and the to decrease it. The treble can be adjusted in 5 steps and is visible in the volume/tone indicator (5). Using Maxi with your mobile phone Pairing 1 Make sure that your Maxi is in microphone mode by pressing the microphone selector (4). 2 Press and hold the Bluetooth selector (11) until the Bluetooth indicator (10) starts to blink in blue. 3 Make sure Bluetooth is activated on your mobile phone. Open the Bluetooth menu in Settings and select "Maxi Pro" in the list. 4 The Bluetooth indicator will emit a steady blue light to show that the pairing was successful. Note: If your phone has been disconnected from Maxi, you need to reconnect the units by repeating step 3. Answering a phone call 1 When the mobile phone rings, the Maxi Bluetooth indicator (10) blinks in blue. All other sounds are muted and you’ll hear the ring signal in your head- phones. 2 To answer the call, press the Maxi Bluetooth selector (11) or use the remote on your headset. You will now hear the enhanced voice of the caller in your headphones. Your voice will be picked up by the Maxi microphone. 3 To hang up, press the Bluetooth selector once more. Note: To decline an incoming call, press and hold the Maxi Bluetooth selector for three seconds. Making a phone call When you talk on the mobile phone, you hear the enhanced voice of the recipient in your headphones. Your voice will be picked up by the Maxi microphone. Streaming music Play a song on your mobile phone and press the Maxi Bluetooth selector (11) until you hear the music. Using a headset with microphone When you talk over the phone, the sound will be picked up from the headset remote microphone instead of the Maxi microphone. Using Maxi for TV listening In order to stream the sound from your TV, you need a Maxi Pro TV streamer, see separate user manual for installation instructions. Listening to the TV Turn on the TV, select a show and press the Maxi Blue- tooth selector (11) until you hear the TV. Note: If you get a call during the show, the sound from the TV will be muted, so you can hear the caller’s voice clearly. When you hang up, the sound from the TV will automatically come back. Automatic reconnection Maxi will automatically reconnect to your TV streamer as soon as it’s within range, so you can bring Maxi when you visit family and friends without hassle. Battery and charging Maxi is equipped with a rechargeable battery that lasts for up to 70 hours. When the battery indicator (8) starts to blink in red, it’s time to charge it, see Charge Maxi. Attaching the clip To attach the clip, place the clip against the back cov- er and press firmly until it locks. To remove it, pull the round handles out from the sides. About Maxi Pro Maxi Pro is a digital speech amplifier that brings out the words so you can hear them loud and clear. Use Maxi to enhance the speech around the table, when you talk on the mobile phone or when you watch TV. Getting started Step 1: Charge Maxi 1 Connect the charging cable to the power adapter (13) and to the charger jack (1) marked in yellow. 2 Fit the mains plug (14) to the power adapter (13) and check that it is properly locked before connecting it to the power outlet. 3 The battery indicator (8) blinks in green during charg- ing. After about three hours it emits a steady green light to show that that Maxi is fully charged. Step 2: Connect Maxi Connect the supplied headphones, earphones, headset, earset or neck loop to the Maxi headphone jack (12) marked in green. Step 3: Start Maxi Press the On/Off button (3) for about one second to start Maxi. The microphone indicator (2) lights up in green and the current volume is shown by the volume/tone indicator (5) for three seconds. To switch Maxi off, press and hold the On/Off button (3) for about three seconds until all indicators go out. Using Maxi to clarify speech Maxi is equipped with a built in omni-directional microphone (9) that enhances speech. Place Maxi on a table close to the person talking, hold it in your hand or attach it to your clothes using the clip. BE2021 Maxi Pro personal amplifier 1. Charger jack 4. Microphone selector 2. Microphone indicator 5. Volume/tone indicator 6. Volume controls 7. Tone controls 8. Battery indicator 3. On/Off 13. Power adapter 14. Mains plug Appearance and function may vary with package 11. Bluetooth selector 10. Bluetooth indicator 12. Headphone jack 9. Microphone

ENGLISH BE2021 BELLMAN & SYMFON AB

BE2021 MAXI PRO PERSONAL AMPLIFIER BE2022 MAXI PRO TV STREAMER EN Medical device information DE Informationen zu Medizinprodukten FI Lääketieteellisiä laitteita koskevat tiedot NL Informatie over medische hulpmiddelen NO Informasjon om medisinsk utstyr SE Information om medicinteknisk utrustning