Beninca CELL.P Manuals

4 pdf manual(s) Beninca CELL.P for free download (Document Types: Manual )

Beninca CELL.P Manual  [PDF] (7 pages)

  • Identifier: id-1582187
  • Brand: Beninca
  • Device: CELL.P Control Unit
  • Type: PDF
  • Key Aspects: Advanced Configuration Methods, Regulatory Compliance and Standards, Package Contents and Accessories List
  • UPD Date: 18.06.2026
  • Source File: 1598531.pdf
  • Pages: 7
  • Description: Official user manual for the Beninca CELL.P.
Pages Preview:
  • 3 DL1 DL2 N GND L LAMP 115/230Vac 40W max SWO SWC DAS PHOT CHIUDE COM APRE SCA SCA P1 SW 1 6 TW TCA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 F3: F6,3A F2: F315 mA F3 F2 8K2 R 24Vac 300mA max 16 17 14 15 16 17 SCA 24Vac 3W max COM M C
  • 8 CELL.P control unit with microcontroller INPUT/OUTPUT FUNCTIONS Terminals Function Description 1, 2, 3 Power supply Input, 230VAC 50/60Hz (1-Phase/2-Neutral/GND-Ground connection) 4, 5, 6 Motor Connection to motor: (MOT-move/COM-Common/MOT-move) 7 LAMP Output, connection to Flashing light: 230 Vac 40W max. 8 SWO Input, OPENING limit switch (Normally Closed contact) 9 SWC Input, CLOSING limit switch (Normally Closed contact) 10 DAS/ PHOT Safety edge or ph
  • 9 11 CLOSE Input, CLOSE key (N.C. contact) 12 COM Common, all control inputs. 13 OPEN Input, OPEN key (N.O. contact). 14, 15 24Vac Output, 24Vac/400mA max accessory power supply. 16,17 SCA Contact free from voltage, not insulated for the connection of open gate indicator lamp. Open contact with closed door leaf. Flashing light during the door leaf movement. With open door leaf, the contact is closed. 18, 19 Antenna Connection to radio receiver antenna inse
  • 10 DIP5 BLI Select how OPEN input (13) works: ON: during opening an OPEN command is ignored During closing an OPEN command reverse the motion. OFF: Works according DIP 6 setting DIP6 OPEN/PP The operating mode of input 13 (Open) is selected. Available only with DIP 5 OFF On: PP Operation: OPEN > STOP > CLOSE > STOP>. Off: OPEN operation always. SERVICE MAN MODE With all DIPs on ON, the control unit switches to SERVICE MAN mode. The SWO and SWC inputs are d
  • 11 LED DIAGNOSTICS The red LED indicates the activation of inputs according to the legend hereunder: STOP on with fixed light DAS/PHOT rapid flashing SWO 1 flash with 2-second interval SWC 2 flashes with 2-second interval OPEN+CLOSE 3 flashes with 2-second interval By flashing slowly, the red LED also indicates that the unit is powered. The green LED indicates the movement direction of the motor and the status of the gate according to the legend here
Document Preview & Text Transcription (Main Page)
Click to expand and read text
L8542928 11/2011 rev 2 CELL.P UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI

Beninca CELL.P Manual  [PDF] (32 pages)

  • Identifier: id-1586724
  • Brand: Beninca
  • Device: CELL.P Control Panel
  • Type: PDF
  • Key Aspects: Routine Functionality Testing, FAQ Section for Common Queries, Pre-Deployment Preparation Steps
  • UPD Date: 18.03.2026
  • Source File: 1593994.pdf
  • Pages: 32
  • Description: Operation instructions for the Beninca CELL.P.
Pages Preview:
  • 3 1 M COM MOT MOT BLINK 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19 20 21 SWO SWC PHOT DAS CLOSE COM OPEN 24 Vac 300mA max SCA 24 Vac 3W max C LAMP 115/230Vac 40W max TW TCA SHIELD ANT ANT U3 F2 230Vac: T100mA T2 P1 P2 S1 1 6 R16 R17 ON OFF STEP-BY-STEP L N DL1 DL2 F3 230Vac: F6,3A J4 DAS Open DAS N.C. J4 DAS Close DAS 8K2 DAS 8K2 R TIMER
  • 4 ITA AVVERTENZE E’ vietato l’utilizzo del prodotto per scopi o con modalità non previste nel presente manuale. Usi non corretti possono essere causa di danni al prodotto e mettere in pericolo persone e cose. Si declina ogni responsabilità dall’inosservanza della buona tecnica nella costruzione dei cancelli, nonché dalle deformazioni che potrebbero verificarsi durante l’uso. Conservare questo manuale per futuri utilizzi. Questo manuale è destin
  • 5 IT Centrale di comando CELL.P FUNZIONI INGRESSI/USCITE Morsetti Funzione Descrizione 1, 2, 3 Alimentazione Ingresso 230Vac 50/60Hz (CELL.P) (1-Fase/2-Neutro/GND-Collegamento di terra) 4, 5, 6 Motore Collegamento al motore: (MOT-marcia/COM-Comune/MOT-marcia) 7 LAMP Uscita collegamento Lampeggiante: 230 Vac 40W max. 8-9 Condensatore Collegamento al condensatore 10 SWO Ingresso finecorsa APERTURA (contatto N.C.) 11 SWC Ingresso finecorsa CHIUSURA (contatto
  • 6 FUNZIONE DIP-SWITCH Dip- Switches Funzione Descrizione DIP1 COPPIA Da utilizzare per la programmazione della coppia come indicato di seguito. Una volta impostati i parametri, riportare in OFF. DIP2 TCA Abilita o disabilita la chiusura automatica. Off: chiusura automatica disabilitata. On: chiusura automatica abilitata. DIP3 DAS/PHOT Seleziona la modalità di funzionamento dell’ingresso DAS/PHOT: Off: inversione parziale (3s) da intervento costa. On: in
Document Preview & Text Transcription (Main Page)
Click to expand and read text
UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI IT EN DE FR ES PL L8543179 10/2018 rev 2 CELL.P all-guides com

Beninca CELL.P Manual  [PDF] (28 pages)

  • Identifier: id-1757642
  • Brand: Beninca
  • Device: CELL.P Control Unit
  • Type: PDF
  • Key Aspects: Recommended Spare Parts List, Advanced Configuration Methods, Hardware Verification Checklists
  • UPD Date: 02.05.2026
  • Source File: 1782633.pdf
  • Pages: 28
  • Description: User guide for the Beninca CELL.P.
Pages Preview:
  • 3 DL1 DL2 N GND L LAMP 115/230Vac 40W max SWO SWC DAS PHOT CLOSE COM OPEN SCA SCA P1 P2 SW 1 6 TW TCA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 F3: F6,3A F2: F315 mA F3 F2 8K2 R 24Vac 300mA max 16 17 14 15 16 17 SCA 24Vac 3W max COM M C TIMER
  • 4 AVVERTENZE Questo manuale è destinato esclusivamente a person- ale qualificato per l’installazione e la manutenzione di aperture automatiche. Nessuna informazione qui presente è di interesse o di utilità per l’utente finale. Conservare questo manuale per futuri utilizzi. L’installatore deve fornire tutte le informazioni relative al funzionamento automatico, manuale e di emer- genza dell’automazione, e consegnare all’utilizzatore dell’impia
  • 5 DATI TECNICI Alimentazione centrale di comando 230 Vac Alimentazione di rete 230 Vac 50/60 Hz oppure 115Vac 50/60Hz a seconda della versione Uscita Motore 1 motore 230 Vac Potenza massima motore 1000 W Uscita alimentazione accessori 24 Vac, 7W max. Grado di protezione IP50 Temp. funzionamento -20°C / +50°C Centrale di comando CELL.P FUNZIONI INGRESSI/USCITE Morsetti Funzione Descrizione 1, 2, 3 Alimentazione Ingresso 230Vac 50/60Hz (CELL.P) (1-Fase/2-N
Document Preview & Text Transcription (Main Page)
Click to expand and read text
L8542928 02/2013 rev 4 CELL.P UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI

Beninca CELL.P Manual  [PDF] (8 pages)

  • Identifier: id-2005730
  • Brand: Beninca
  • Device: CELL.P Control Unit
  • Type: PDF
  • Key Aspects: Technical Data and Parameters, Package Contents and Accessories List, Step-by-Step Assembly Procedures
  • UPD Date: 14.05.2026
  • Source File: 2282128.pdf
  • Pages: 8
  • Description: Product documentation for the Beninca CELL.P.
Pages Preview:
  • 3 DL1 DL2 N GND L LAMP 115/230Vac 40W max SWO SWC DAS PHOT CLOSE COM OPEN SCA SCA P1 P2 SW 1 6 TW TCA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 F3: F6,3A F2: F315 mA F3 F2 8K2 R 24Vac 300mA max 16 17 14 15 16 17 SCA 24Vac 3W max COM M C TIMER
  • 8 WARNINGS This manual has been especially written to be use by qualified fitters. None of the information provide in this manual can be considered as being of interest for the end users. Preserve this manual for future needs. The technician has to furnish all the information rela- ted to the step by step function, the manual and the emergency function of the operator, and to deliver the manual to the final user. • Foresee on the supply net an onnipolar
  • 9 TECHNICAL DATA Control unit power supply 230 Vac Power supply 230 Vac 50/60 Hz or 115Vac 50/60Hz according to the version Output supply 1 motore230 Vac Power maximum motor 1000 W Output supply accessories 24 Vac, 7W max. Protection level IP50 Operating temp. -20°C / +50°C CELL.P control unit with microcontroller INPUT/OUTPUT FUNCTIONS Terminals Function Description 1, 2, 3 Power supply Input, 230VAC 50/60Hz (1-Phase/2-Neutral/GND-Ground connection) 4,
  • 10 4) Send an opening control signal through the OPEN input. 5) The door leaves should open. If not, with stopped motor, it is sufficient to invert the move wires of the motor (MOT/MOT) of the motor and the limit switches (SWO/SWC), if used. 6) Adjust Times and operating Logics. TRIMMER FUNCTIONS TW It allows the maximum duration of opening and closing. It must be preset approx. 4s more with respect to the actual stroke time of the system. The adjustment
Document Preview & Text Transcription (Main Page)
Click to expand and read text
L8542928 02/2013 rev 4 CELL.P UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI

CELL.P: Related Instructions

CP.BULL8 OM
Beninca CP.BULL8 OM
28.04.2026 11 pages

L8542646 03/2013 rev 1 CP.BULL8 OM UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI User instruction manual for the Beninca CP.BULL8 OM Gate Opener. This documentation details procedures for installation guides, error handling, calibration steps.

RI.624N
Beninca RI.624N
15.07.2026 24 pages

RI.624N L8542287 Rev. 11/06/03 UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE, SERRANDE ED AFFINI APRICANCELLO SCORREVOLE ELETTROMECCANICO ELECTRO Advanced user manual for the Beninca RI.624N Gate Opener. It covers topics such as security instructions, maintenance procedures, device calibration, reset instructions.

MB24V
Beninca MB24V
30.05.2026 32 pages

L8542881 09/2014 rev.3 MB24V MBE24V AUTOMAZIONE PER CANCELLI A BATTENTE AUTOMATION FOR HINGED GATES AUTOMATION FÜR TORE AUTOMATION POUR PORTAILS OUVRANTS AUTOM Essential instructions for the Beninca MB24V Gate Opener. It offers details on supported accessories, technical troubleshooting, operational safety, power requirements.

THINK-I
Beninca THINK-I
10.04.2026 10 pages

THINK L8542632 03/2012 rev 5 UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI THINK THINK-P THINK-I Operation and maintenance manual for the Beninca THINK-I Control Unit. It details safety instructions and supported accessories, performance guidelines, safety.

KMB24
Beninca KMB24
27.06.2026 28 pages

L8542881 02/2016 rev 4 KMB24 UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI Owner’s manual for the Beninca KMB24 Door Opening System. It provides technical information on performance guidelines, installation, power management, user instructions.

PIXEL
Beninca PIXEL
21.07.2026 10 pages

03/2021 rev 1 PIXEL UNIONE NAZIONALE COSTRUTTORI AUTOMATISMI PER CANCELLI, PORTE SERRANDE ED AFFINI Complete usage guide for the Beninca PIXEL Gate Opener. It explains network setup, device features, setup validation.

Similar Manuals in the Control Panel, Control Unit Category

System Sensor MOD400R
Pittway System Sensor MOD400R
03.08.2026 2 pages

Models Available MOD400R Field Sensitivity Test Module MOD400R Field Sensitivity Test Module © System Sensor 8/98 This document is not intended to be used for Usage and setup manual for the Pittway System Sensor MOD400R Control Unit. It describes usage and performance guidelines, operating modes, internal layout, safety guidelines.

UV-O 1000
Purified Air UV-O 1000
23.04.2026 13 pages

UV-O 1000 TECHNICAL & OPERATION MANUAL User handbook for the Purified Air UV-O 1000 Air Cleaner. It details device setup and replacement parts, system setup, wiring diagrams.

CDM-A100 Series
Campbell CDM-A100 Series
09.07.2026 61 pages

INSTRUCTION MANUAL CDM-A100 Series CDM-A108 and CDM-A116 Revision: 11/16 C o p y r i g h t © 2 0 1 5 - 2 0 1 6 C a m p b e l l S c i e n t i f i c , I n c Quick reference guide for the Campbell CDM-A100 Series Control Unit. The document guides users through calibration steps, operation, shutdown procedures.

Nemo SX SXM0C1
IME Nemo SX SXM0C1
16.06.2026 45 pages

1 / 15 Via Travaglia 7, 20094 Corsico (MI) - Italia Tel. +39 0244878.1 - Fax +39 024503448 Nemo SX - Modulo di comando multifunzione Codice: SXM0C1 Sommario Pa Comprehensive operating guide for the IME Nemo SX SXM0C1 Control Unit. It details device setup and safety features, installation guides, wiring setup.