Besam AAE977 Manuals

Ultraview US23-0640-09 07-30-09 V4 © Copyright 2009 Besam US Inc. May not be reprinted without permission 1 Complies with ANSI/BHMA A156.10 Standard for Power Operated Pedestrian Doors. UL325 Listed Besam UltraView Installation Manual AAE977 Contents Important Information Technical Specifications Component Identification Electrical Installation Initial Sensor Setup Mechanical Adjustments Remote Control 1-Way Traffic Setup Manual Setup Troubleshooting Retrofit Installation Standard Inputs vs. Auxiliary Inputs The Ultraview combines k-band microwave and focused active infrared technology to provide superior activation and safety for the Unislide door system. For activation, the unit provides digitally processed and sophisticated motion tracking technology for unidirectional sensing when energy conservation is critical. For safety, the unit emits two rows of 24 beams of focused presence technology that provides extraordinary safety in and around the threshold Area. The active infrared curtains never shut off, even during closing. Thus providing superior detection performance. SPECIAL NOTE: The Ultraivew works differently than the BEA Wizard... When making changes to the Ultraview reference the Ultraview users guide. If you inadvertently make changes based on the BEA Wizard, you will cause problems within the Ultraview system, which will result in callbacks. Important notice! To avoid bodily injury, material damage and malfunction of the product, the instructions contained in this manual must be strictly observed. Note! Instructions, design, specifications and illustrations that are contained in this manual are not binding. Rights reserved for changes without previous notice. Environment This operator may be equipped with batteries containing materials that are hazardous to the environment. Remove the batteries from the operator before it is scrapped. The batteries must be disposed of safely. 2 3 4 4 5-6 6 7-8 9 10 11 12-13 13 Product Overview Important Information Ultraview US23-0640-09 07-30-09 V4 © Copyright 2009 Besam US Inc. May not be reprinted without permission 2 Motion Sensor Presence Sensor Technical Specifications Description Spe cification Supply voltage 12 to 24 VDC: -5% to + 10% Power consumption <125 mA @24 VDC per sensor Mounting height: Standard High 5’9” to 8’2” (1753 mm to 2489 mm) 8’2” to 13’ (2489 mm to 3962 mm) Output Motion Sensor Optocoupled Transistor (Activation) Max output current: 200 mA Max switching power:48 VDC Hold time 0.5 sec (fixed) Presence Sensor Optocoupled Transistor (Safety) Max output current: 200 mA Max switching voltage:48 VDC Hold time 1 sec (fixed) Monitoring P1: Test (0V) P2: C-Switch 3-color LED GREEN : motion detection RED : presence detection ORANGE : monitoring / error code Temperature range -30°F to +131°F (-34° C to + 55° C) Degree of protection NEMA 3S / (IP54) Sensor dimension (exposed) 11.9” (302mm) L x 1.9” (48mm) W x 0.9” (24mm) D Weight 0.55 lbs / 250 g Housing material ABS & LURAN S Cable description: Quick-disconnect Harness (sensor) Short Extension Harness (black) Long Extension Harness (gray) 1’ (300 mm), plug and play, 10-conductor 6’ (1530 mm), plug and play, 10-conductor 16’ (4580 mm), plug and play, 10-conductor Product conformity R&TTE 1999/5/EC & EMC 89/336/EEC, FCC Interface Factory Installed Technology Microwave and microprocessor Transmitter frequency: 24.125 GHz Transmitter radiated power: <20 dBm EIRP Transmitter power density: < 5 mW/cm² Focused active infrared with background track- ing and self-monitored microprocessor Spot diameter (standard) : 4” max Number of spots : 24 or 12 spots by curtain Number of curtains : 2 Detection field at 7’ (2130mm) mount height Wide field Narrow field 13’0” W x 6’6” D (3962 mm W x 1981 mm D) 6’6” W x 8’2” D (1981mm W x 2489 mm D) 6’6” W x 13.75” D (1981mm W x 349 mm D) 3’3” W x 13.75” D (991 mm W x 349 mm D) Detection mode Minimum detection speed 2 inches / sec. (measured in the sensor axis) Response time : < 128ms Angular adjustments from 15° to 45° in elevation (adjustable) from - 4° to + 4° (adjustable) Manual adjustment Orientation of sensing field (mechanically) Shape of the sensing field (choice of antenna) Multiple functions (using push buttons). Orientation of sensing field Shape of the sensing field (choice of lens) Multiple functions (using push buttons). Remote control adjustments Sensitivity Detection mode Immunity Sensitivity Auto-learn time Ultraview US23-0640-09 07-30-09 V4 © Copyright 2009 Besam US Inc. May not be reprinted without permission 3 Component Identification Electrical Installation Connect the Extension Harnesses to the Ultraview Interface Board at the control as follows: 1. Designate the sensors as P1 or P2. Important: The side of the door “not intended for use” when door is in one-way mode will be designated P2. 2. The longer extension harness has a gray jacket and will be connected to the sensor on the plank side. The shorter extension harness has a black jacket and is connected to the header access side. Based on Step 1, connect the appropriate extension harness to the appropriate connector on the Ultraview Interface Board. Ultraview US23-0640-09 07-30-09 V4 © Copyright 2009 Besam US Inc. May not be reprinted without permission 4 MOUNTING SCREWS INFRARED LENS SHROUD SENSOR COVER ULTRAVIEW INTERFACE BOARD QUICK DISCONNECT HARNESS(2 per system) SHORT (black) EXTENSION HARNESS LONG (gray) EXTENSION HARNESS WIDE IR US21-0640-07 NARROW IR US21-0640-08 US02-0640-01 US21-0640-06 US02-0640-02 US02-0640-05 DIP SWITCH STOP/IMPULSE(BREAKOUT INPUT) P2 P1 STD/AUX SWITCH KNOWING ACT INPUT (AUX) US02-0640-04 US02-0640-03 Ultraview Replacement Sensor Kit - US15-0640-14 One assembled unit consisting of sensor, shroud, cover, wide lens, narrow lens, mounting screws and quick disconnect harness. (Not available as a spare part) (Not available as a spare part)