BFT FL130 Manuals

1 pdf manual(s) BFT FL130 for free download (Document Types: Installation and user manual)

BFT FL130 Installation and user manual [PDF] (2 pages)

  • Identifier: id-850069
  • Brand: BFT
  • Device: FL130 Gate Opener
  • Type: PDF
  • Key Aspects: Hardware Verification Checklists, Best Practices for Everyday Use, Documentation and Revision History
  • UPD Date: 07.08.2026
  • Source File: 894507.pdf
  • Pages: 2
  • Description: Practical user guide for the BFT FL130.
Document Preview & Text Transcription (Main Page)
Click to expand and read text
FL130 - Ver. 05 - 1 1) GENERAL OUTLINE - Pair of photocells (transmitter-receiver) with doubl relay, normally energised on exit. FL130 - If used as device type D, as per regulation EN12453, the maintenance of the door/gate should be done at least every six months. FL130 B - It can be used as device type D, as per regulation EN 12453, if connected with a control unit with a "CIRCUIT WHICH VERIFIES THE CORRECT FUNCTIONING OF THE SAFETY DEVICES". This product complies with the recognised technical standards and safety regulations. We declare that this product is in conformity with the following European Directives: 89/336/EEC and following amendments. 2) TECHNICAL SPECIFICATIONS - Power supply 20 to 31Vac / 22÷30Vdc; Absorption per pair 70mA; Max range 30m (reduced in fog or rain); Relay contacts 1A at 24Vac-dc; Working temperature –15°C to + 70°C; Degree of protection IP 54. 3) FITTING - They should be aligned and mounted at a height between 40 and 60 cm from the ground. The surfaces used for fastening should be flat and parallel to each other. Mounting on pillar (fig. 1). Mounting on CF130 post (fig. 2). If two pairs of photocells are mounted near each other, cross the RX-TX positions (fig. 3). 4) TERMINAL BOARD 4.1) FL130 (fig.4) - Power supply 1(+) 2(-); 3-4 NO contact. 4.2) FL130B (fig.5) - Power supply 1(+) 2(-); contact NC 3-4, NO 3-5. To connect the contacts, follow the instructions provided for the control devices used (control unit) 5) ALIGNMENT - Correct photocell alignment is obtained when the light of the RX receiver LED (fig. 4-5) can be seen after the cover has been fitted. When there is an obstacle between the RX receiver and the TX transmitter, the LED goes off and the relay opens the contact. GB 33.5 26 81.5 32 13 72.5 29.5 115 DIMENSIONI - DIMENSIONS DI- MENSIONS -ABMESSUNGEN DIMENSIONES - DIMENSÕES FIG.1 mod. CF130 FIG.2 40-60cm FIG.3 1) GÉNÉRALITÉS - Couple (émetteur-récepteur) avec double relais normalement excité à la sortie. FL130 - En cas d’utilisation comme dispositif de “type D”, conformément à la norme EN 12453, prévoir dans le plan de maintenance de la porte/portail un contrôle au moins tous les six mois. FL130B - Peut être utilisé comme dispositif de “type D” conformément à la norme EN 12453 en le reliant à une centrale de commande avec “CIRCUIT DE CONTROLE DES DISPOSITIFS DE SÉCURITÉ”. Ce produit est conforme aux normes reconnues de la technique et des dispositions en matière de sécurité. Nous confirmons sa conformité aux directives européennes 89/336/CEE et aux modifications successives. 2) CARACTÉRISTIQUES TECHNIQUES - Alimentation 20÷31 Vc.a / 22÷30Vdc; Puissance absorbée couple 70 mA; Portée maxi 30 m (réduite en cas de brouillard-pluie); Contacts relais 1A à 24Vc.a.-c.d. Température de fonctionnement -15° ÷ +70°C; Degré de protection IP54. 3) FIXATION - Elles doivent être fixées alignées à une hauteur comprise entre 40 et 60 cm du sol. Les surfaces de fixation doivent être plates et parallèles entre elles. Montage sur pilier (fig. 1). Montage sur colonne CF130 (fig. 2). Si on monte deux couples de cellules photo-électriques rapprochées, croiser les positions RX-TX (fig. 3). 4) BORNIER 4.1) FL130 (fig.4) Alimentation 1(+) 2(-); 3-4 Contact NO. 4.2) FL130B (fig.5) Alimentation 1(+) 2(-); Contact NF 3-4, NO 3-5. Pour connecter les contacts, suivre les indications des instructions des dispositifs de contrôle utilisés (unité de commande). 5)ALIGNEMENT - L’alignement correct des cellules photo-électriques est obtenu lorsque, avec le couvercle monté, l’on entrevoit la Del du récepteur RX (fig. 4-5) allumée. En cas d’obstacle entre le récepteur RX et l’émetteur TX, la Del s’éteint et le relais ouvre le contact.” FIG.5 F FIG.4 TX RX TX RX LED NC NO 3 4 5 2 (VTX) 20-31V~ (VTX) 22-30V= COM 20-31V~ 22-30V= RX TX 1 2 1 (+) (+) LED 20-31V~ 22-30V= COM PHOT RX TX 2 3 4 1 (+) 1 2 (+) 1) GENERALITA' - Coppia (trasmittente-ricevente) con doppio relè normalmente eccitato in uscita. FL130 - Se usato come dispositivo di "Tipo D", secondo la norma EN 12453, deve essere prevista una sua verifica almeno semestrale nel piano di manutenzione della porta/cancello. FL130B - Può essere usato come dispositivo di " Tipo D" secondo la norma EN 12453, se collegato ad una centralina con "CIRCUITO DI VERIFICA DEI DISPOSITIVI DI SICUREZZA". Questo prodotto risponde alle norme riconosciute della tecnica e delle disposizioni relative alla sicurezza. É conforme alle seguenti direttive europee: 89/336/CEE e modifiche successive. 2) DATI TECNICI - Alimentazione 20÷31Vac / 22÷30Vdc; Assorbimento coppia 70mA; Portata max 30m (ridotta in caso di nebbia-pioggia); Contatti relè 1A a 24Vac-dc; Temperatura funzion. -15°C / +70°C; Grado di protezione IP54. 3) FISSAGGIO - Devono essere fissate allineate ad una altezza compresa tra i 40-60cm dal suolo. Le superfici di fissaggio devono essere piane e parallele tra loro. Montaggio a pilastro (fig.1). Montaggio a colonna CF130 (fig.2). Nel caso vengano montate due coppie di fotocellule ravvicinate, incrociare le posizioni RX-TX (fig.3). 4) MORSETTIERA 4.1) FL130 (fig.4) - Alimentazione 1(+) 2(-); 3-4 Contatto NO. 4.2) FL130B (fig.5) - Alimentazione 1(+) 2(-); Contatto NC 3-4, NO 3-5. Per il collegamento dei contatti, attenersi a quanto indicato nelle istruzioni dei dispositivi di controllo impiegati (centralina di comando). 5) ALLINEAMENTO - L'allineamento corretto delle fotocellule, è ottenuto quando, con coperchio mon- tato, si intravede il LED della ricevente RX (fig.4-5) acceso. In presenza di ostacolo fra ricevente RX e trasmittente TX, il LED si spegne ed il relè apre il contatto. ISTRUZIONI D'USO E DI INSTALLAZIONE INSTALLATION AND USER'S MANUAL INSTRUCTIONS D'UTILISATION ET D'INSTALLATION INSTALLATIONS-UND GEBRAUCHSANLEITUNG INSTRUCCIONES DE USO Y DE INSTALACIONI INSTRUÇÕES DE USO E DE INSTALAÇÃOIOON FOTOCELLULA PHOTOCELL PHOTOCELLULE PHOTOZELLE FOTOCÉLULA FOTOCÉLULA Via Lago di Vico 44 36015 SCHIO (VICENZA) Tel.naz. 0445696511 Tel.int. +39 0445696533 Fax 0445696522 INTERNET www.bft.it E-MAIL [email protected] FL130 - FL130B I D811233 ver.05 06-03-07 8 8 11 4 4 0 2 0 0 27 9

BFT FL130: Gate Opener Category Related Instructions

H12-ETL-1K
Nice Apollo H12-ETL-1K
19.04.2026 36 pages

Rev���� INSTALLATION MANUAL H12-ETL-1K 12 VOLTS DC Swing Gate Operator Step-by-step user manual for the Nice Apollo H12-ETL-1K Gate Opener. This guide includes detailed instructions for safety protocols, operating conditions, connectivity options, operational safety.

HDSL24UL
Chamberlain HDSL24UL
02.08.2026 10 pages

COMMERCIAL DC VEHICULAR SLIDE GATE OPERATOR INSTALLATION MANUAL • THIS PRODUCT MUST BE INSTALLED AND SERVICED IN ACCORDANCE WITH THIS MANUAL BY A TRAINED GATE SYSTEMS TECHNICIAN ONLY. • This operator is for use on vehicular passage gates ONLY and not inten Comprehensive instruction manual for the Chamberlain HDSL24UL Gate Opener. This documentation details procedures for troubleshooting guides, operational safety, application scenarios.

A4366
CAME A4366
04.06.2026 2 pages

Documentazione Tecnica S41 rev. 2.2 03/2005 © CAME CANCELLI AUTOMATICI A4366 119AS41 SERIE FROG | FROG SERIES | SÉRIE FROG | BAUREIHE FROG | SERIE FROG | SERIE FROG ITALIANO LA CONFEZIONE COMPRENDE: - meccanismo di sblocco; - chiave di sblocco personalizzata User reference guide for the CAME A4366 Gate Opener. This manual covers installation, operation, and firmware installation, service instructions, power requirements, maintenance.

A 3024 N
CAME A 3024 N
17.05.2026 12 pages

AUTOMATION FOR SWING GATES INSTALLATION MANUAL ATI SERIES A 3024 N A 5024 N Full user manual for the CAME A 3024 N Gate Opener. The document highlights operating procedures and operating modes, component overview, performance optimization, device features.