Biamp Desono C-IC6 Manuals

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA T: +1 503.641.7287 W: www.biamp.com JUNE 2019 Product Description The desono™ C-IC6 is a low-profile, two-way passive coaxial loudspeaker optimized for speech and music reproduction in conferencing applications. The C-IC6 may be used with traditional amplifiers, and also directly integrates with the Tesira® AMP-450BP: a four-channel “backpack” PoE+ amplifier that attaches directly to the C-IC6. Setup and Use The Tesira software provides an intuitive interface for setup and programming of the AMP-450BP. The information supplied by this manual relates to physical connections and device setup. For more details on software setup, please consult the Tesira Help File. The C-IC6 conferencing loudspeaker is equipped with a bridge-mounted 165mm, treated paper low-frequency woofer, a separate 25mm soft-dome high-frequency tweeter and a passive crossover/protection circuit network. The coverage angle is 130° and includes a four-position, 5.08 pluggable Euroblock connector and two RJ-45 connectors for audio signal connections. The C-IC6 speaker supports audio connections via either standard category cable or traditional speaker cable. The loudspeaker includes a tile bridge kit for secure installation in a ceiling. It also features a magnetic grill for tool-less installation and removal. The grille plate is available in white, black or red, and can be painted to match the room decor. The optionally-available AMP-450BP includes an audio locate feature on the front face that allows installers to validate cabling and connections before the audio system is fully commissioned. Installation Install away from heat sources, such as vents, radiators, heat registers and stoves. Also avoid installing near water or steam. The conferencing loudspeaker has a secondary support point via chain or wire for connecting to the building structure. Do not exceed the maximum ambient operating temperature of 32° - 95° F (0° - 35° C). Per UL 1480A Section 6.1.6 - Use watertight cable, conduit, or EMT fittings for installation in outdoor or wet locations. The loudspeaker includes a tile bridge installation kit. Detailed installation instructions are on the following pages. Features • Low-profile passive speaker, less than 6-inches (153 mm) total depth • 8-ohm nominal impedance • 130° coverage angle optimized for low ceilings • Supports both standard category cables and traditional speaker wiring for audio connections • Designed for integration with the AMP-450BP (backpack PoE+ amplifier) • Bridge-mounted 1-inch (25 mm) soft dome tweeter • 6.5-inch (165 mm) treated paper woofer mechanically isolated from the high frequency driver • 60W with peak power of 240W desono™ C-IC6 Loudspeaker Installation & Operation Guide