BIOMET GPS III Manuals
1 pdf manual(s) BIOMET GPS III for free download (Document Types: Manual )
BIOMET GPS III Manual [PDF] (2 pages)
- Identifier: id-1454286
- Brand: BIOMET
- Device: GPS III Laboratory Equipment
- Type: PDF
- Key Aspects: Product Performance Metrics, Error Code Explanations, Regulatory Compliance and Standards
- UPD Date: 29.08.2026
- Source File: 1544155.pdf
- Pages: 2
- Description: Operational manual for the BIOMET GPS III.
Click to expand and read text
Process Steps Attach supplied 18 gauge needle to 60ml syringe. Withdraw 5ml of ACD-A (citrate anticoagulant). 55ml of blood is then drawn from the patient according to facility protocol. Mini GPS® III System: Attach supplied 18 gauge needle to 30ml syringe. Withdraw 3ml of ACD-A. 27ml of blood is then drawn from the patient according to facility protocol. Push Open/Stop button on control panel. The “unlocked” indicator will illuminate. Turn latch counter-clockwise to open lid. Place tube into centrifuge. Mini GPS® III System: If using the mini kit, mini purple buckets must be inserted into the centrifuge. Step One: Blood Draw Remove protective cover on white cap and discard. Screw white cap onto center port. Unscrew cap on center port No.1 and discard green packaging post. Slowly load blood into center port. Step Two: Load Blood Close the lid by rotating the lid latch Clockwise. “Latched” indicator will illuminate. The speed (3200 RPM) and time (15 minutes) are preset. Press green button to start spin. Once spin is complete, press red button to illuminate the “Unlocked” indicator. Twist latch counter-clockwise to open lid. Spin To extract the platelet poor plasma (PPP), remove yellow cap on side port No. 2 and connect the 30ml syringe. Slowly tilt the tube while withdrawing. Replace yellow cap. Step Four: PPP Extraction PRP Suspension and Extraction Extract the remaining platelet rich plasma (PRP) contents into the attached 10ml syringe. Step Three: Balance Fill GPS® III System counterbalance with 60ml of sterile saline and place into opposite side of centrifuge. Mini GPS® III System: Fill purple mini Counterbalance with 30ml of sterile saline and place into opposite side of centrifuge. With 10ml syringe attached, suspend the platelets by gently shaking the tube for 30 seconds. Remove red cap on side port No. 3 and connect 10ml syringe. Withdraw 2ml. Mini GPS® III System: Remove red cap on side part No. 3 and connect 10ml syringe. Withdraw 1ml. Platelet Separation System
GPS III: Related Instructions
The Biomet® EBI Bone Healing System Physician Manual and Package Insert English Language all-guides .com Professional manual for the BIOMET EBI Bone Healing System Medical Equipment. The manual describes performance guidelines, wiring setup, daily usage.
OnPoint™ Operation and Care Manual 1.2mm Scope System Anticipate. Innovate. TM Manufactured by BioVision Technologies, LLC Manufactured for Product reference manual for the BIOMET OnPoint Medical Equipment. It describes maintenance tasks and maintenance, supported accessories, setup validation, technical specifications.
0459 I-417000-15 ECR 20121201 Last revision 2013/01 OPTIVAC VACUUM MIXING SYSTEM Before using the OPTIVAC Vacuum Mixing System, this insert should be read throu Manual for installation and usage of the BIOMET OPTIVAC VACUUM MIXING SYSTEM Laboratory Equipment. The manual contains instructions for power requirements, technical overview, maintenance schedule.
100 Interpace Parkway • Parsippany, NJ 07054 800.526.2579 • www.biomet.com • 1068012L Rev B ©2010 EBI, LLC. All trademarks are the property of Biomet, In Installation reference manual for the BIOMET 2001A Medical Equipment. It describes operating procedures and replacement parts, maintenance schedule, system setup, connectivity setup.
Operator’s Manual Step-by-step guide for the BIOMET PowerPump System Water Pump. It describes maintenance tasks and operating guidelines, software configuration, repair references, product safety.
Operation and Care Manual all-guide s.com Installation and maintenance guide for the BIOMET innerVue II Medical Equipment. It explains installation, setup, and component replacement, device features, operational safety, service procedures.
Similar Manuals in the Laboratory Equipment Category
The KRONNER SIDE-KICK A uterine manipulator Holder for holding the Arch Koh uterine manipulator* Instructions for use * Model UMH 67, manufactured by CooperSurg Installation reference manual for the Kronner SIDE-KICK Medical Equipment. It explains maintenance and safety features, technical guidelines, usage procedures.
Maintenance and service manual for the Agilent Technologies 490 Micro GC Measuring Instruments. It explains installation, setup, and safety information, maintenance, product safety, system setup.
Single-Port 10/100/1000Mbps 802.3bt PoE Injector POE-171A Series User’s Manual Manual for safe operation of the Planet POE-171A-60 Laboratory Equipment. This guide provides technical guidance on wiring diagrams, operating instructions, detailing setup.
• Operator’s Manual STATIM ® 900J AUTOCLAVE 95-110106 JP EN R2. Copyright © 2017 SciCan Ltd. All rights reserved. . all-guide s.com Product instruction manual for the SciCan STATIM 900J Laboratory Equipment. The manual outlines system configuration and product maintenance, configuration options, network setup.