Biometra Whatman WT16 Manuals

Mini Rocking Platform WT16 230 V Order-No. 042-500 115 V Order-No. 042-590 Mini-Tumbling Table WT17 230 V Order-No. 042-600 115 V Order-No. 042-690 Manual August 2004 !! Warning !! Please read these instructions carefully before using this apparatus! Biometra GmbH Rudolf-Wissell-Str. 30 D-37079 Göttingen Service Department Postfach 1544 Rudolf-Wissell-Str. 14-16 D-37005 Göttingen D-37079 Göttingen Tel: ++49 – (0)5 51 / 50 68 6-0 Tel.: ++49 – (0)5 51 / 50 68 6-10 or -12 Fax: ++49 – (0)5 51 / 50 68 6-66 Fax.: ++49 – (0)5 51 / 50 68 6-11 e-mail: [email protected] e-mail: [email protected] internet: http://www.biometra.de 1 1.0 Intended Uses And Specifications Unpack the Mini Rocking Platform WT16 or Mini Tumbling Table WT17 carefully. Examine for signs of damage and check the contents against the packing list. Notify BIOMETRA or your local BIOMETRA distributor immediately if you discover any damage or item discrepancies. Save all packing material if damage is found. Do not attempt to operate this device if physical damage is present. Read the complete instruction manual thoroughly and make sure that every user of the mixer/shaker has also read the instructions thoroughly before putting the equipment into operation. Keep the instruction manual where it can be consulted by all users. If, after reading the instruction manual, you still have any questions concerning the installation, operation or maintenance of the mixer/shaker, please contact BIOMETRA or your local BIOMETRA distributor. 2.0 Packing List The following individual and accessory part are supplied. Compare the contents of the shipment gbefore discarding the packing materials. We recommend keeping the original packing for future transport or storage purposes. Item Quantity Mini Rocking Platform WT16 1 or Mini Tumbling Table WT17 1 Instruction manual 1 Power cable 1 3.0 Specifications 2 Standing area 320 x 350 mm Unit weight approx. 8 kg Area of shaking platform 260 x 290 with non-slip, removable rubber pad with raised edge. Ambient temperature 0 °C to 50 °C at 80 % relative humidity. Suitable for use in gassing and incubating cabinets. Power input 30 W Voltage / frequency 230/240 V, 50/60 Hz Protection class IP30 Drive electronically controlled capacitor motor with overheating cut-out Mini Rocking Platform WT16 - for mixing with gentle rocking motion Rocking frequency 2 - 50 cycles/min Angle of inclination 5 ° / 10 ° Load capacity 5 kg static; see Figure 1 for limitations with eccentric loading Mini Tumbling Table WT17 - for mixing with gentle asymmetrical motion Asymmetric cycle frequency 2 - 50 cycles/min Angle of inclination 5 ° (optional 10 °) Load capacity 5 kg static; see Figure 1 for limitations with eccentric loading All mixers/shakers are designed for continuous operation.