Black Box VSP-HDMI1X2-4K Manuals

724-746-5500 | blackbox.com 724-746-5500 | blackbox.com 724-746-5500 | blackbox.com Page 5 Page 6 © Copyright 2014. Black Box Corporation. All rights reserved. Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Intel is a trademark of Intel Corporation in the U.S. and/or other countries. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. BLACK B Distribute HDMI audio and video out to two displays. 1 x 2 HDMI Splitter 4K VSP-HDMI1X2-4K HDMI Splitter 4K User’s Manual Audio Auto Mixing: Automatically perform the minimum audio format of all attached displays. Video Inventory: After copying Video EDID, use the copied Video EDID. Audio Inventory: After copying Audio EDID, use the copied Audio EDID. 3.2.2 EDID Copy Before starting, slide the Audio/Video EDID setting switch to position 2, 3, or 4. Step 1. Connect the monitor (EDID compliant) to the video output Port 1 on the splitter and power on the monitor. Step 2. Press the “EDID COPY” button, then release it RIGHT AFTER the LED flashes GREEN and RED (about 3 seconds). Step 3. The LED returns to normal status indicating that EDID copy is completed. Otherwise, if the Status LED flashes RED, it means that: a. The monitor is not properly connected. b. The monitor is not powered on. c. EDID data of the monitor is not applicable. 3.2.3 EDID Factory Default Setting To set the EDID copy to factory default: Step 2. Press the “EDID COPY” button, then release it RIGHT AFTER the LED flashes GREEN twice (about 9 seconds). Step 3. The LED returns to normal status indicating that EDID copy is completed. 4. Operation The quality of the output signal depends on the quality of video source, cable, and display device used. Low-quality cables degrade output signals causing elevated noise levels. Use the proper cable and make sure the display device can handle the resolution and refresh rate selected. Interference from nearby electrical devices can adversely affect signal quality. Table 4-1. LED indicator functions. LEDs 1 and 2 Status Flashing green Power ON to Port 1 or 2 Steady green Port 1 or 2 is outputting the data vsp-hdmi1x2-4k_ds_rev1 1. Specifications Enclosure Metal TMDS Clock Rate 300 MHz Video Resolution (Maximum) 4K x 2K (3840x 2160) User Controls (1) EDID Copy button Connectors Input: (1) HDMI female, Output: (2) HDMI female Indicators (2) Output Status LEDs Power Consumption: 9–12 VDC, 220 mA Dimensions 0.8"H x 6.1"W x 2.6"D (2 x 15.6 x 6.5 cm) Weight 0.627 lb. (0.285 kg) NOTE: The splitter is not 4K compatible when using Intel® HD 4400 based services. 5. Troubleshooting Symptom: Video does not display Possible Cause: Wrong installation process. Solution: The video splitter requires at least one monitor connection before powering on the source device. Symptom: Erratic behavior Possible Cause: Splitter may not receive enough power. Solution: Check the power adapter attached to the splitter to make sure it matches the system specifications, and is functioning properly. Symptom: Not receiving picture or sound. Possible Cause: The signal source may require a display device that is HDCP compliant. Solution: Check if the display monitor is HDCP compliant. HDCP prevents the transfer of digital content to unauthorized HDMI devices. Symptom: The display monitor is added to the unit by hot-plug, but the video source may not support hot-plug. Possible Cause: Check if the video source supports hot-plug. If it doesn’t, shut down the source device and reboot it again. The attached devices are not connected properly. Solution: Check if you connected your components correctly. HDMI Splitter 4K User’s Manual Disclaimer: Black Box Network Services shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Network Services may revise this document at any time without notice.