BLK BOX 21-0174 Manuals

OWNERS MANUAL & QUICK START GUIDE MED BALL STORAGE NOTE : PLEASE READ ALL THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS PRODUCT. BLK BOX PRODUCT SPECIFICATION PRODUCT WEIGHT DIMENSIONS - 12kg 1380mm x 356mm x 200mm - 21-0174 #MADEINBELFAST WARNING xx Nm SPIRIT LEVEL 10MM MASONRY DRILL BIT TOOLS REQUIRED 13MM SPANNER HAMMER HAMMER DRILL VACUUM PARTS & ATTACHMENTS SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE). WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT. EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS. THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL. #MADEINBELFAST No. Name SKU QTY 1 MED BALL STORAGE 21-0237 1 2 M10X80 SLEEVE ANCHOR 10-0031 4 3 M10 FLAT WASHER 10-0019 4 1 2 3 #MADEINBELFAST INSTALLATION 1 MEASURE, MARK AND DRILL HOLES USING GUIDES PROVIDED. -DRILL 10MM HOLE INTO THE WALL, 90MM DEEP -VACUUM OUT THE DUST. DRILL HOLE VACUUM 90MM SLEEVE ANCHOR BOLT FITTING 1050mm CENTER LINE 1268mm #MADEINBELFAST #MADEINBELFAST 2 30 Nm x4 ATTACH MED BALL STORAGE (21-0237) TO THE WALL USING SLEEVE ANCHORS (10-0031) AS SHOWN. TIGHTEN ALL BOLTS TO SPECIFIED TORQUE. -HAMMER SLEEVE ANCHOR INTO THE HOLE. -TIGHTEN SLEEVE ANCHOR TO SPECIFIED TORQUE USING 13MM SPANNER. 30 Nm HAMMER IN BOLT TIGHTEN SLEEVE ANCHOR BOLT FITTING