BLK BOX FREE STANDING COMPACT RIG GOLIATH Manuals

OWNERS MANUAL & QUICK START GUIDE FREE STANDING COMPACT RIG GOLIATH NOTE : PLEASE READ ALL THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS PRODUCT. BLK BOX 21-0119-0B #MADEINBELFAST 85kg PRODUCT SPECIFICATION PRODUCT WEIGHT MAX USER WEIGHT MAX USER MAX TRAINING WEIGHT DIMENSIONS SAFE WORKING ZONE - 125kg 300kg 1200mm x 2408mm x 820mm - - - - 2700mm x 3272mm x 2020mm 2 - all-guides com 4 5 6 7 8 WARNING SPIRIT LEVEL 10MM MASONRY DRILL BIT TOOLS REQUIRED 17MM SPANNER X2 13MM SPANNER HAMMER HAMMER DRILL VACUUM STEP LADDER PARTS & ATTACHMENTS 1 3 2 SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE). WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT. EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS. PLEASE BE AWARE OF THIS SYMBOL AS AN INDICATION TO CHECK THAT A PART IS LEVEL OR PLUMB. THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL. #MADEINBELFAST No. Name SKU QTY 1 2.4 UPRIGHT DNA60 WITH FEET 21-0036-0A 4 2 1.2 SINGLE BAR CM DNA60 21-0015-0A 2 3 0.4 BOX & BAR CM DNA60 21-0009-0A 2 4 J-HOOK PAIR 16-0001 1 5 M10X80 SLEEVE ANCHOR 10-0031 12 6 M10X90 BOLT 10-0008 24 7 M10 NYLOCK NUT 10-0024 24 8 M10 FLAT WASHER 10-0016 60 xx Nm x 2 4 ASSEMBLY 1 BOLT 2QTY 1.2 BAR (21-0015-0A) AND 2QTY 0.4 BOX & BAR (21-0009-0A) BETWEEN 4QTY UPRIGHTS (21-0036-0A) WITH BOLT ASSEMBLY AS SHOWN. ENSURE UPRIGHTS LOGOS ARE FACING OUTWARD AND BOLTS ARE FACING INWARD. 10.0008 10.0019 x2 10.0024 #MADEINBELFAST x 1 2 2 TIGHTEN ALL BOLT ASSEMBLIES WITHIN THE CIRCLE AS SHOWN TO SPECIFIED TORQUE. ENSURE UPRIGHTS ARE PLUMB, DRILL AND SECURE ALL HOLES ON UPRIGHTS A SHOWN IN GUIDE. #MADEINBELFAST 10.0031 10.0019 30 Nm DRILL HOLE VACUUM HAMMER IN BOLT TIGHTEN 90MM SLEEVE ANCHOR BOLT FITTING -DRILL 10MM HOLE THROUGH FLOOR COVERING, 90MM DEEP USING PLATE AS A GUIDE. -VACUUM OUT THE DUST. -HAMMER SLEEVE ANCHOR DOWN INTO THE HOLE. -TIGHTEN SLEEVE ANCHOR TO SPECIFIED TORQUE USING 13MM SPANNER. 30 Nm X24