Blueant X3 MICRO Manuals

X3 Micro FAQ

Quick Start Guide Quick Start Guide Inside the box One Bluetooth Headset. One X3 micro User Guide. One Quick Start Guide. One USB charging cable. One car lighter adapter for USB charging cable. One AC wall charger One soft gel earbud cover One foam earbud cover One removable ear-hook. Pairing the Headset to a Mobile Phone 1. Charge the X3 micro for at least 4 hours before use. Reboot the mobile phone. 2. Long Press the MFB (Multi-Function Button) to turn the X3 micro ON. (The X3 may go straight into Pairing mode and not require the next step, LED flashes Red to Blue) 3. Long press Vol to enter Pairing mode. LED flashes Red to Blue. 4. Turn Bluetooth ON in your phone. 5. Perform a device discovery to search for the X3 micro. 6. When devices are displayed, select the X3 micro. Enter Passkey “1234”. 7. Set the X3 micro as a trusted/authorised device, if optional in your phone. 8. Short press the MFB once to connect to your phone. Voice dialing will be activated if it is enabled in your phone. To cancel voice dialing, short press the MFB . 9. For X3 operations refer to Function / Button Matrix below. To pair up to 2 more devices; phones, smartphones, pda’s or computers – 1. Short press the MFB and Vol together to disconnect the current phone. 2. Repeat steps 5 – 8 for each device you want to pair. 3. See Multi Connect Call Switching below. Once the Headset has been disconnected (by switching off or going out of range) you will need to reconnect by: 1. Short pressing the MFB Once for the first paired phone Twice for the second paired phone Three times for the third paired phone. 2. Voice dialing will be activated if enabled in phone To cancel voice dialing Short press the MFB To disconnect from the currently connected phone and switch to another: 1. Short press the MFB and Vol together 2. Short press the MFB Once for the first paired phone Twice for the second paired phone Three times for the third paired phone. Function / Button matrix Power on/off Pair Voice dial using the current connected phone when connected Voice dial through the first paired phone when not connected Cancel voice dialing Cancel last call redial Answer a call End a call Voice dial through the second paired phone when not connected Voice dial through the third paired phone when not connected Turn on/off LED lights (disconnect from phone first) Last call redial using the current connected phone when connected Last call redial using the first paired phone when not connected Reject a call Volume up Volume down Mute / Unmute the microphone Disconnect the Bluetooth connection to the current phone Audio transfer from the headset to your phone Reset (deletes all stored pairing information) long press for 3 seconds long press for 3 seconds short press 1 time short press 2 times short press 3 times short press 5 times long press for 3 seconds long press for 3 seconds short press 1 time short press 1 time short press 1 time short press 1 time short press 1 time Function Button Reconnecting the Headset Multi Connect Call Switching

User Guide X3 Micro Bluetooth Headset Introduction 1-2 Bluetooth headset overview 3-5 Getting started 6-11 Using your headset 12-18 Using your headset with multiple Bluetooth devices 19-23 Function / Button matrix 24-25 LED indicator chart 26-27 Audio indicator chart 28 Additional information 29-32 Declaration of conformity 33-35 Regulatory information 36 Frequently Asked Questions 37-48 Contact Us and Warranty Process and conditions 49-52