Bluerock Tools Z1 TEL Manuals

OPERATIONAL MANUAL MODEL: 10”Z1 TEL TELESCOPING CORE DRILLING MACHINE by BLUEROCK ® Tools Volume 1.0 1 0 ” Z 1 T E L C O R E D R I L L UNPACKING THE ITEM CAUTION: This machine is packed together with items that may be sharp, oily and overly heavy objects. Remove the machine from the packaging in a safe manner. Check to ensure all accessories are included with the item while unpacking. If any parts are found to be missing, contact the retailer as soon as possible. Do not throw away the packaging until the item is out of the guarantee period. Dispose of the packaging in an environmentally responsible manner. Recycle if possible. Keep all plastic bags away from children due to risk of suffocation. WEEE - Waste Electrical & Electronic Equipment. Note this machine should be disposed of as electrical & electronic waste. SLURRY DISPOSAL NOTE: It is recommended to dispose of the drilling slurry (the muddy/dusty water material) in an environmentally responsible manner. The disposal of slurry directly into sewage systems, sewers, lakes, rivers, or direct earth without treatment can be environmentally harmful and possibly illegal. Ask your local public authorities about current regulations in your area. ã THE NEWMAN TRADING COMPANY LLC DBA BLUEROCK® TOOLS 2020 1033 Andover Park East, Tukwila WA 98188 USA Phone 206.604.8363 • Fax 425.572.5167 www.bluerocktools.com 1 0 ” Z 1 T E L C O R E D R I L L Table of Contents SAFETY 1 PRE-OPERATIONAL SAFETY CHECKS 1 OPERATIONAL SAFETY CHECKS 1 HEALTH WARNINGS 2 SPECIFICATIONS 4 INCLUDED ACCESSORIES 4 ADDITIONAL AVAILABLE ACCESSORIES 5 ADDITIONAL ACCESSORIES FOR THIS MACHINE CAN BE FOUND IN BLUEROCK ® TOOLS ONLINE SHOP AT WWW.BLUEROCKTOOLS.COM OR FROM YOUR LOCAL RETAILER. 5 OPERATIONS 6 PURPOSE 6 OPERATIONAL PRINCIPLES 6 MACHINE COMPONENTS 6 TRANSPORTING THE MACHINE 9 RUNNING THE MACHINE 10 INSTALLING CORING BITS 11 TROUBLESHOOTING 12 GENERAL MAINTENANCE 13 OCCASIONAL MAINTENANCE 13 MOTOR AND GEARBOX PARTS LIST 15 BREAKDOWN VIEW – MOTOR 16 BREAKDOWN VIEW – GEARBOX 17 PARTS LIST – DRILLING STAND 18 BREAKDOWN VIEW – DRILLING STAND 19 1 0 ” Z 1 T E L C O R E D R I L L 1 Safety DO NOT USE THIS MACHINE UNLESS YOU HAVE READ THE OPERATING INSTRUCTIONS! Safety glasses must be worn at all times in work areas. Long and loose hair must be contained. Appropriate footwear must be worn. Close fitting/protective clothing must be worn. Safety gloves should be worn at all times and jewelry must not be worn. Hearing protection should be worn when using this machine. Hard-hat must be worn while using machine. Dust mask must be worn while using this machine. Read operational manual prior to use. PRE-OPERATIONAL SAFETY CHECKS Ø Examine the power cord and plug for damage. This tool is supplied with a ground plug and must always be used with a properly grounded circuit. Ø Examine the body of the machine and inspect for damage or defects. OPERATIONAL SAFETY CHECKS Ø ONLY to be operated by qualified personal who have read instructions. o NOTE: Failure to read and follow instructions could result in electrical shock, fire, property damage and/or serious injury! Ø DO ensure all non-essential people are clear of the immediate work area. Ø DO be attentive at all times. Keep your eye on the work piece. Always be in a sensible state of mind and do not use the machine if you cannot fully concentrate. Ø DO keep body parts, clothing & power cords clear of turning/cutting pieces. Stay alert and use common since when using this tool. Chapter 1