Bluestream BS4590 Manuals

MODEL: BS4590 Wireless Indoor/Outdoor Stereo Speaker System Instruction Manual For Technical Assistance or Troubleshooting Please Call 1-855-719-8324 WARNINGS • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. • To reduce the risk of electric shock, do not open the cabinet. No user serviceable parts are inside. Refer servicing to qualified personnel. • Batteries should not be exposed to excessive heat such as direct sunlight, fire, or other heat sources. • Caution: Do not expose this appliance to dripping or splashing liquids. Do not put objects filled with liquid, such as vases on or near the appliance. • Caution: To turn this appliance off completely, the POWER cord must be unplugged from the wall outlet. The power cord must be easily accessible at all times. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF NON-INSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. CAUTION DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE FRONT OR REAR COVER. NO USER SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. FCC WARNINGS WARNING: Changes or modifications to this unit not expressly approved in this manual could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and/or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the POWER cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as POWER-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. S3125A COMPONENT IDENTIFICATION TRANSMITTER 1. Power LED Indicator 2. Signal LED Indicator 3. Audio Inputs (Standard RCA Inputs 4. Channel Selector Switch 5. 8V DC IN SPEAKERS REMOTE CONTROL 15. Power ON/OFF button 16. Volume Up button 17. Tune button 18. Volume Down button 19. Mute button 20. Lanyard Ring 6. Remote Sensor 7. Volume Up button 8. Volume Down button 9. Tune button 10. POWER button 11. Power/Signal LED Indicator 12. Battery Compartment 13. LMR (Left / Mono / Right) Selector Switch 14. 9V DC IN DC 8V DC 8V L M R USING YOUR SPEAKERS CONNECTING THE TRANSMITTER 1. Plug the supplied 8V AC/DC power adapter into the DC IN jack (5) located on the rear of the transmitter. 2. Insert the wall plug of the power adapter into an electrical wall outlet. The Power LED Indicator (1) will glow Green. CONNECTING YOUR DEVICE The Transmitter can be connected to a 3.5mm audio output or headphone jack of any device such as a MP3 player, iPod, iPad, Tablet, Smartphone, etc., or to devices with standard Red & White RCA audio output jacks such as TVs, DVD players, VCRs, etc. Connect a Device with a 3.5mm Output Jack To connect a device with a 3.5mm audio output, insert the included single 3.5mm stereo plug into your device’s audio output or headphone jack. Then connect the Red & White ends of the cable to the matching color coded Audio Inputs (3) on the Rear of the Transmitter. INPUT AC DC 8V