BMS BMS EcoCam 5 Manuals

BMS EcoCam 5 BMS EcoCam 8 User manual Applicable for:  BMS EcoCam 5 (74702)  BMS EcoCam 8 (74704) ECD150316 Introduction Thank you for choosing BMS. Please read this manual carefully before using the camera. Please make sure you are understanding this manual completely. In case something is not clear, please get in contact with your supplier or local dealer. They will be at your service. In case you have any additional questions about this manual, please forward them, by email, to [email protected]. A camera is a precision instrument with delicate glass components. Please handle with care. The BMS EcoCam camera has a 5 or 8 megapixel high quality camera sensor, auto focus, extra long goose neck, WiFi connection, integrated LED illumination in the head, HDMI with HD1080P resolution, VGA output, ability to annotate, draw or mark over live or saved images and is easily adaptable for microscopy use with adapters. It is recommended that an adult is supervising at all time. The BMS EcoCam camera makes it possible to study a variety of different 3D objects and documents but also structures and textures of botanical and zoological nature at cell level when connected to a microscope. Both prepared slides or self made slides can be observed. This camera is developed according the latest technology on optical and mechanical details. Safety Information  Always disconnect mains plug from power point before maintenance  Work in a clean and proper environment  Think of the safety of yourself and those working around you  Clean all parts that come in contact with the observed specimen to prevent infection  Place the camera on a sturdy, level table or working surface  Always use original accessories and power adapters Caution The delicate components may get damaged if the camera is not handled with care. Use the camera in a clean environment. Do not use it when it is subject to direct sunlight, high temperatures, humidity or dust. Carry the camera with care, do not carry it by just holding the goose neck. Please make sure to always use the correct 5V/2A (for BMS EcoCam 5) or 3A (for BMS EcoCam 8) BMS adapter with your BMS EcoCam camera. 1 Getting started Take the camera out of the packaging. Included will be the following; 1. The BMS EcoCam camera 2. USB cable 3. USB stick (includes software) 4. Mouse, cordless, including battery 5. LAN cable 6. Adapter 5V/2A (BMS EcoCam 5) or 5V/3A (BMS EcoCam 8)100- 240V 7. Remote control with batteries 8. HDMI cable 9. VGA cable 2 Optional accessories Item code Product description 747038 Compound microscope adapter eyepiece outer Ø 28 mm 747039 Stereo microscope adapter eyepiece outer Ø 34 mm 76395 Aluminum case 760465 Eyepiece WF10x without pointer 747035 BMS EcoCam 5 power adapter Euro 100-240V/5V 2A 747036 BMS EcoCam 5 power adapter UK 100-240V/5V 2A BMS EcoCam 8 power adapter Euro 100-240V/5V 3A BMS EcoCam 8 power adapter UK 100-240V/5V 3A Once you have checked all items included, place the camera on a steady surface. By moving the goose neck you can get the desired angle and focal point to your specimen. When connecting to a microscope, always attach the required optional accessory adapter (28 mm or 34 mm) before connecting to the microscope. Now connect the power supply adapter (5V) to the BMS EcoCam camera. You can immediately use the BMS EcoCam with any of the supplied cables. When using with a computer, firstly install the supplied software. The software can be found on the supplied USB stick. For instructions, see further in this manual. Inputs and outputs: 1. HDMI: HDMI signal output. (Used for linkage with HDMI display equipment) HDMI is the primary signal output when starting the camera the first time. 2. VGA OUT: VGA (RGB) signal output (15 pin D-SUB). (Used for linkage with VGA display equipment) Note: The HDMI output and VGA output are not simultaneous, there can only be one output activated at same time. BMS EcoCam automatically activates the last used output. If there is no image when the camera is turned on, showing on the connected display (it takes 1min to start), the connected output is not properly activated. Please use a smartphone or a tablet and the WiFi signal of the BMS EcoCam to choose the appropriate output. 3. LAN: Network connection (used to connect with your network) 4. USB-B: USB connection (used to connect with your PC) 5. USB: USB connection for the receiver of the supplied cordless USB mouse. To control the BMS Ecocam camera or for the USB memory stick to save the images/videos. 3