BMS EASY-CHECK FN Manuals

EASY-CHECK FN COATING THICKNESS METER OPERATIONAL MANUAL Bms Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No : 7-9 İkitelli / İSTANBUL-TÜRKİYE Phone : +90 212 671 02 24 / 671 02 25 Fax : +90 212 671 02 26 web : www.bulutmak.com e-mail : [email protected] Operation EASY- CHECK FN Manual Rev:00 2 / 10 Introduction ...............................................................................................................3 Easy-Check FN ........................................................................................................3 And This Is Really Unique............................................................................................3 Short Instructions ......................................................................................................3 Function Modes ..........................................................................................................4 Operation Of The Function Modes ................................................................................4 Store readings in the Data Memory.................................................................4 Display Statistics...........................................................................................4 Print or activate the RADIO CONTROL function................................................5 Clear the last reading.....................................................................................5 Clear the whole Data Memory.........................................................................5 Base material recognition..............................................................................5 Change unit of measurement (µm / mils).........................................................5 Resolution ....................................................................................................6 Calibration..................................................................................................................6 General Remarks ........................................................................................................7 Exchange Of The Battery..........................................................................................7 Charge The 1.2v Rechargeable Battery With The Line-Charging Unit...............................7 Technical Data............................................................................................................8 Optional Accessories ...................................................................................................8 Software Incl. Operation Instructions ........................................................................8 Radio-Control .............................................................................................................9 Data Printer Mega-Print............................................................................................9 Data Printer Mega-Print..............................................................................................9 Technical Data: .......................................................................................................9 Operating Instructions .............................................................................................9 Insert a new paper roll...........................................................................................10 Operation EASY- CHECK FN Manual Rev:00 3 / 10 Introduction Congratulation ! You really made a good choice to decide for Easy-Check FN, because this device is not only designed and manufactured according to the latest level of technology, but also is extremely comfortable and easy to operate. We tried our best to write this manual as clear and short as possible. For any further in- formation you may need, please contact our Service Department. Our technicians are al- ways ready to help you. What can you measure with EASY-CHECK FN ? On iron and steel (FE) all non-magnetic coatings, such as varnish, paint, plastics, enamel, rubber, ceramics and galvanization (except niquel) up to 5,0 mm. On non-ferrous metals (aluminium, brass, bronze, zinc, lead, copper and non- magnetic steel) all non-conductive coatings, such as varnish, paint, plastics, rubber and anodizing up to 2,5 mm. And in addition you can also measure paint coatings on zinc plated steel without considering the zinc thickness. In addition EASY-CHECK FN includes the following features • Store up to 1000 readings in the data memory • Display statistics • Transfer all readings and statistics to a printer or computer by means of the interface, or just • Transfer the data by RADIO. All these functions can be performed with the red key. And This Is Really Unique The device recognizes by itself on which base material the measurement is taken, whether on steel (FE) or on non-ferrous metal (NFE) and displays the symbol with each reading. EASY-CHECK FN can measure up to 80 hours with only one 1.5V Mignon battery. Worldwide the only device with a swinging measuring probe allowing to measure inside pipes and in other inaccessible places. Short Instructions To make it as easy as possible for you and to be able to start taking measurements imme- diately, we have already calibrated the device. You receive the instrument ready for operation and do not need to perform any ad- justments. You just switch on the device with the red key. In the display appears . That´s all and now you can start taking measurements. Function Modes Switch on the device by pressing the key until is displayed. Release the key. While switching on and pressing the key for a longer time the software version and the status of the Lock Function for calibration (from software 13.1) are displayed. When you now press the key once again for a longer time the following functions will ap- pear one after another: Sto = Store readings in the Data Memory StA = Display Statistics Prn = Print or activate the Serial Interface IcL = Clear the last reading cLr = Clear the whole Data Memory nFE = Base material recognition NFE = recognizes exclusively non-ferrous metals un = Change the unit of measurement (µm / mils) rES = Switch over the resolution from 1.0 µm to 0.1 µm By pressing the key the mode selected is confirmed. Operation Of The Function Modes Store readings in the Data Memory To store readings in the memory for further evaluation press the key until is dis- played. Now release the key and wait until is flashing. Confirm by pressing the key again. The data memory is activated and all subsequent measurements will be stored. The sym- bol is displayed to make evident that the memory is switched on. Capacity of the data memory : 1000 readings When the memory has reached its capacity limit the symbol is displayed. As soon as the device is switched off the memory mode is deactivated. Display Statistics The readings stored in the data memory are evaluated as follows: No. - Number of readings stored MIN - Lowest reading stored MAX - Highest reading stored MEAN - Mean value STD.DEV. - Standard deviation Press the key until the symbol appears. Now wait until is flashing and con- firm by pressing the key again. The statistics values are displayed one after another. Operation EASY- CHECK FN Manual Rev:00 4 / 10