Britax Kid XP Manuals

KID XP 15 to 36 kg (~4 to 12 years of age) User instructions GB www.britax.eu 2000010044 14/01 Removing the seat cover 1. Moving the headrest of the vehicle seat into the top position. 2. Unhook the cover hook 19 on the rear of the backrest. 3. Remove the top part of the cover and fold it forwards to the seat surface. 4. Unhook the cover hook 19 on the front of the backrest. 5. Pull the cover off of the seat surface. Removing the headrest cover 6. Unhook the cover loop 20 on the rear of the backrest. 7. Unhook the cover hook 19 on the front of the backrest. 8. Pull off the cover of the headrest 22 . ► ►The cover can now be washed. Please observe the instructions on the washing label of the cover: Re-fitting the cover Proceed in reverse order to put on the cover. 5. CARE AND MAINTENANCE 01 03 05 07 06 02 04 Belt guide (bright red) Belt holder (dark red) 01 02 03 04 05 06 07 Backrest Seat cushion Storage compartment XP-PAD Adjusting handle of the headrest 19 20 19 19 22 2. INTRODUCTION We are delighted that our KID XP can safely accompany your child through a new stage in its life. In order to protect your child correctly, the KID XP must always be used and installed as described in these instructions. If you have any further questions regarding its use, please feel free to contact us: BRITAX RÖMER Kindersicherheit GmbH Blaubeurer Straße 71 D-89077 Ulm Germany T.: +49 (0) 731 9345-199 F.: +49 (0) 731 9345-210 E.: [email protected] www.roemer.eu BRITAX EXCELSIOR LIMITED 1 Churchill Way West Andover Hampshire SP10 3UW United Kingdom T.: +44 (0) 1264 333343 F.: +44 (0) 1264 334146 E.: [email protected] www.britax.eu These instructions use the following symbols stated below: Symbol Keyword Explanation DANGER! Risk of severe personal injury WARNING! Risk of minor personal injury CAUTION! Risk of material damage TIP! Useful notes Instructions that follow a set sequence are numbered. Example: 1. Press the button... 16 15 Belt guide colours For better differentiation, the two vehicle seat belts are highlighted in different colours. The di- agonal seat belt 16 in dark red and the lap belt 15 in bright red. The colour of the belt guides on the child safety seat follows the same colour scheme. 4. USE IN THE VEHICLE Please observe the instructions for using children's restraining systems in the operating instructions of your vehicle. The seat can be used in vehicles with a 3-point belt. Please find the information on the seats approved for child safety seats of the weight classes 15 to 36 kg in the operating instructions of your vehicle. The KID XP is approved for one method of installation: Symbol Installation type Approval type with the vehicle's 3-point seatbelt universal You can use your child safety seat as follows: In the direction of travel yes against the direction of travel no 1) with 2-point belt no with 3-point belt 2) yes on front passenger seat yes 3) on outer rear seat yes on centre rear seat (with 3-point belt) yes 4) 1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect of an airbag. 2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on belt with an "E" or "e" in a circle). 3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions in vehicle owner's manual. 4) Cannot be used if the vehicle seat is equipped with only a 2-point belt. 15–36 kg 3. Certification BRITAX RÖMER Child safety seat Testing and certification In accordance with ECE* R 44/04 Group Body weight KID XP II+III 15 to 36 kg *ECE = European Standard for Child Safety Equipment The child safety seat has been designed, tested and certified according to the requirements of the European Standard for Child Safety Equipment (ECE R 44/03). The seal of approval E (in a circle) and the approval number are located on the orange approval label (sticker on the child safety seat). DANGER! This approval will be invalidated if you make any modifications to the child safety seat. Only the manufacturer is permitted to make modifications to the child safety seat. WARNING! Use the KID XP exclusively for securing your child in your vehicle. It is in no way suitable as a seat or toy in the home. DANGER! Never secure your child or the child safety seat with a 2-point belt. If you secure your child in the child seat with only a 2-point belt, then in the event of an accident this may cause serious injuries to your child, possibly resulting in death. PAGE I 6. DISASSEMBLY AND DISPOSAL Please ensure that you only use the original BRITAX RÖMER replacement seat covers, as the seat cover is an integral part of the child safety seat and fulfils im- portant functions to ensure the smooth operation of the system. Replacement seat covers are available from your dealer or from an ADAC office. • The cover can be removed and washed with a mild detergent in the delicates programme of the washing machine (30 °C). Please observe the instructions on the washing label of the cover. • The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use any caustic cleaning agents (such as solvents). DANGER! The child seat must not be used without the seat cover. 1. PRODUCT OVERVIEW 1. Operate the release key of your vehicle seat buckle 2. Open the XP-PAD 04 on the Velcro fastener and remove the diagonal belt 16. 3. Open the dark red belt holder 01 by pressing back- wards the key on the belt holder 01 and unthread- ing the diagonal belt 16. ► ►The child safety seat can now be removed. DANGER! the child safety seat must always be secured when it is in the vehicle, even if no child is being transported. DISPOSAL: Please observe the waste disposal regulations in your country. Disposal of packaging Container for cardboard boxes Seat cover Residual waste, thermal utilisation Plastic parts According to the labelling in the corresponding container Metal parts Container for metals Belt straps Container for polyester Buckle and tongue Residual waste REMOVAL: UNFASTENING YOUR CHILD: 1. To unfasten your child, use the release button of your vehicle seat buckle. TIP! The XP-PAD can remained applied for easier use on the diagonal belt of your vehicle, the diagonal belt must be retensioned before every journey; see: Section 10 step 12 [page II]. 01 16 04

Removing the seat cover 1. Moving the headrest of the vehicle seat into the top position. 2. Unhook the cover hook 19 on the rear of the backrest. 3. Remove the top part of the cover and fold it forwards to the seat surface. 4. Unhook the cover hook 19 on the front of the backrest. 5. Pull the cover off of the seat surface. Removing the headrest cover 6. Unhook the cover loop 20 on the rear of the backrest. 7. Unhook the cover hook 19 on the front of the backrest. 8. Pull off the cover of the headrest 22 . ► ►The cover can now be washed. Please observe the instructions on the washing label of the cover: Re-fitting the cover Proceed in reverse order to put on the cover. 5. CARE AND MAINTENANCE 01 03 05 07 06 02 04 Belt guide (bright red) Belt holder (dark red) 01 02 03 04 05 06 07 Backrest Seat cushion Storage compartment XP-PAD Adjusting handle of the headrest 19 20 19 19 22 2. INTRODUCTION We are delighted that our KID XP can safely accompany your child through a new stage in its life. In order to protect your child correctly, the KID XP must always be used and installed as described in these instructions. If you have any further questions regarding its use, please feel free to contact us: BRITAX RÖMER Kindersicherheit GmbH Blaubeurer Straße 71 D-89077 Ulm Germany T.: +49 (0) 731 9345-199 F.: +49 (0) 731 9345-210 E.: [email protected] www.roemer.eu BRITAX EXCELSIOR LIMITED 1 Churchill Way West Andover Hampshire SP10 3UW United Kingdom T.: +44 (0) 1264 333343 F.: +44 (0) 1264 334146 E.: [email protected] www.britax.eu These instructions use the following symbols stated below: Symbol Keyword Explanation DANGER! Risk of severe personal injury WARNING! Risk of minor personal injury CAUTION! Risk of material damage TIP! Useful notes Instructions that follow a set sequence are numbered. Example: 1. Press the button... 16 15 Belt guide colours For better differentiation, the two vehicle seat belts are highlighted in different colours. The di- agonal seat belt 16 in dark red and the lap belt 15 in bright red. The colour of the belt guides on the child safety seat follows the same colour scheme. 4. USE IN THE VEHICLE Please observe the instructions for using children's restraining systems in the operating instructions of your vehicle. The seat can be used in vehicles with a 3-point belt. Please find the information on the seats approved for child safety seats of the weight classes 15 to 36 kg in the operating instructions of your vehicle. The KID XP is approved for one method of installation: Symbol Installation type Approval type with the vehicle's 3-point seatbelt universal You can use your child safety seat as follows: In the direction of travel yes against the direction of travel no 1) with 2-point belt no with 3-point belt 2) yes on front passenger seat yes 3) on outer rear seat yes on centre rear seat (with 3-point belt) yes 4) 1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect of an airbag. 2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on belt with an "E" or "e" in a circle). 3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions in vehicle owner's manual. 4) Cannot be used if the vehicle seat is equipped with only a 2-point belt. 15–36 kg 3. Certification BRITAX RÖMER Child safety seat Testing and certification In accordance with ECE* R 44/04 Group Body weight KID XP II+III 15 to 36 kg *ECE = European Standard for Child Safety Equipment The child safety seat has been designed, tested and certified according to the requirements of the European Standard for Child Safety Equipment (ECE R 44/03). The seal of approval E (in a circle) and the approval number are located on the orange approval label (sticker on the child safety seat). DANGER! This approval will be invalidated if you make any modifications to the child safety seat. Only the manufacturer is permitted to make modifications to the child safety seat. WARNING! Use the KID XP exclusively for securing your child in your vehicle. It is in no way suitable as a seat or toy in the home. DANGER! Never secure your child or the child safety seat with a 2-point belt. If you secure your child in the child seat with only a 2-point belt, then in the event of an accident this may cause serious injuries to your child, possibly resulting in death. PAGE I 6. DISASSEMBLY AND DISPOSAL Please ensure that you only use the original BRITAX RÖMER replacement seat covers, as the seat cover is an integral part of the child safety seat and fulfils im- portant functions to ensure the smooth operation of the system. Replacement seat covers are available from your dealer or from an ADAC office. • The cover can be removed and washed with a mild detergent in the delicates programme of the washing machine (30 °C). Please observe the instructions on the washing label of the cover. • The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use any caustic cleaning agents (such as solvents). DANGER! The child seat must not be used without the seat cover. 1. PRODUCT OVERVIEW 1. Operate the release key of your vehicle seat buckle 2. Open the XP-PAD 04 on the Velcro fastener and remove the diagonal belt 16. 3. Open the dark red belt holder 01 by pressing back- wards the key on the belt holder 01 and unthread- ing the diagonal belt 16. ► ►The child safety seat can now be removed. DANGER! the child safety seat must always be secured when it is in the vehicle, even if no child is being transported. DISPOSAL: Please observe the waste disposal regulations in your country. Disposal of packaging Container for cardboard boxes Seat cover Residual waste, thermal utilisation Plastic parts According to the labelling in the corresponding container Metal parts Container for metals Belt straps Container for polyester Buckle and tongue Residual waste REMOVAL: UNFASTENING YOUR CHILD: 1. To unfasten your child, use the release button of your vehicle seat buckle. TIP! The XP-PAD can remained applied for easier use on the diagonal belt of your vehicle, the diagonal belt must be retensioned before every journey; see: Section 10 step 12 [page II]. 01 16 04 15 to 36 kg (~4 to 12 years of age) www.britax.eu 2000010044 14/09 User instructions KID XP GB 140901_KID_XP_GB.indd 1 02.09.2014 14:37:52