BST K12A Manuals

© Copyright LOTRONIC 2014 K12A-K15A-K18A Page 1 ACTIV SUBWOOFER CAISSON DE BASSE ACTIF K12A ( 15-2857 ) K15A ( 15-2858 ) K18A ( 15-2859 ) GB - INSTRUCTION MANUAL F - MANUEL D’UTILISATION © Copyright LOTRONIC 2014 K12A-K15A-K18A Page 2 ENGLISH Thank you for having chosen our activ subwoofer. For your own safety, please read this user manual carefully before installing the device. SAFETY INTRODUCTION  If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising condensation could damage the device. Leave the device switched off until it has reached room temperature.  It is essential that the device is earthed. A qualified person must carry out the electric connection.  Make sure that the available voltage is not higher than stated at the end of this manual.  Make sure the power cord is never crimped or damaged. If it is damaged, ask your dealer or authorized agent to replace the power cord.  Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by plug. Never pull out the plug by tugging the power cord.  DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. CAUTION: 1. Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep away from children and non-professionals. 2. The light doesn’t include any spare parts for repair, please check if all the parts are well installed and screws are fitted tightly before operating. Do not use the light when the cover is open. GENERAL GUIDELINES  This device is only allowed to be operated with an alternating current of max. 110-120VAC / 220-240VAC / 50-60Hz and was designed for indoor use only.  Operate the device only after having familiarized yourself with its functions. Do not permit operation by person not qualified for operating the device. Most damages are the result of unprofessional operation.  Please use the original packaging if the device is to be transported.  For safety reasons, please be aware that all modifications on the device are forbidden. Furthermore, any other operation may lead to short-circuit, burns, electric shock, crash, etc. If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void. © Copyright LOTRONIC 2014 K12A-K15A-K18A Page 3 DESCRIPTION 8. COOLING FAN This fan is used used to refresh power amplifier. don't obstruct these parts 9. POWER SWITCH This switch is used to to switch the subwoofer built-in power amplifier on or off. 10. POWER SUPPLY SELEC The main power supply is different between country ( in france :220V ). Select the good value with the switch ( 110V or 220V ) 1. INPUT Connect on this socket ( Combo XLR - Jack ) a line level device as cd player, DVD player, mixer,.... 2. LINK OUTPUT This ouput is same signal as the input. Connect this output to an other activ speaker or to a power amplifier 3. CUT FREQUENCY CONTROL This control is use to adjust the cut frequency of subwoofer. The system will cut all frequency of input above the cut frequency to let only the bass frequencies to the built-in power amplifier 4. LEVEL CONTROL This control is used to adjust main level control of the subwoofer. 5. PHASE SWITCH This button is used to change the signal phase to the opposite. If you think the bass sound from the subwoofer is shifted with the satellite speaker signal, push on this button 6. COOLING VENTS This hole are used to refresh power amplifier. don't obstruct these parts 7. AC SOCKET Before to connect the ac cord on this socket, make sure that the available voltage is not higher than stated at the end of this manual © Copyright LOTRONIC 2014 K12A-K15A-K18A Page 4 TECHNICAL SPECIFICATIONS K12A : Woofer : 12'' ( 31cm ) Frequency Range (-10 dB) : 45 Hz - 500Hz RMS Power Rating : 350 W Impedance : 8 ohms Max SPL : 107 dB SPL peak System Sensitivity (1w/1m) : 95 dB SPL Input sensitivity : 1.2V Distortion : <0,5% Damping factor : >200 Protection : Soft start, short circuit, overheating Power supply : AC110-120V / 220-230V / 50-60Hz Enclosure : Low-frequency, 15 mm, plywood (multi layer) Dimensions (D x W x H) : 490 mm x 460 mm x 414 mm Net Weight : 25 kg K15A : Woofer : 15'' ( 38cm ) Frequency Range (-10 dB) : 45 Hz - 250Hz RMS Power Rating : 450 W Impedance : 8 ohms Max SPL : 118 dB SPL peak System Sensitivity (1w/1m) : 101 dB SPL Input sensitivity : 1.2V Distortion : <0,5% Damping factor : >200 Protection : Soft start, short circuit, overheating Power supply : AC110-120V / 220-230V / 50-60Hz Enclosure : Low-frequency, 15 mm, plywood (multi layer) Dimensions (D x W x H) : 550 mm x 520 mm x 480 mm Net Weight : 45 kg