Buffalo WZR-AGL300NH Manuals

WZR-AGL300NH Router Settings (For : Pccw, HGC PPPoE User) Hardware Setup of WZR-AGL300NH Router: 1. Power on Buffalo Router, and wait for 1 minutes. The “Power”, “n” and “Router” indicators will be ON, and other indicators will be OFF. 2. At the back of router, set the switch “Router” to “ON” 3. To reset the router, please insert “RESET” hole by a paper clip for about 10 seconds, and wait for 1 minutes. The “Power”, “n” and “Router” indicators will be ON, and other indicators will be OFF. 4. Please power off modem for 1 minute. Then power on modem again. 5. Please connect your broadband service with a network cable (or from modem) to the “Internet” port on the ROUTER. Then use another network cable to connect “LAN1” port on the ROUTER to the Ethernet adapter on your PC. Make sure indicators “Internet” and “LAN1” on front panel are ON. 6. Wait for 1 minute. Last Update Apr 16, 2009 Hornington Knowledge Base http://kb.hornington.com WZR-AGL300NH PPPoE Page 1