Bulldog Security BulldogOne BD1 Manuals

BD1 & IK1 (Key Switch Start) User Guide These instructions are for a NEGATIVE EARTH VEHICLE and covers fitting and operating the BulldogOne (BD1) with an IMMOBILISER (IK1) using a KEY START and NO siren fitted. The tracker and immobiliser must be fitted by a competent auto electrician. BEFORE installing, please register your BulldogOne and ensure correct operation on the smartphone app These installation instructions are for the installation of a BulldogOne (BD1) tracker and Immobiliser Kit (IK1). The installation shown in Fig. 1 provides the facility to remotely cut off the engine (via the smartphone app) and immobilise the key switch of the vehicle and cut off the engine (using an automatic feature of the BD1 when in armed mode) - see section 11 to 14 for more details IMPORTANT: The Orange wire MUST connect to the ignition ACC output. The wire from the ignition ON output needs to be cut where shown and wired from the ignition block into port 30 on the harness and the other end of the cut cable into port 87A. Once wiring is complete, mount the BulldogOne with the BulldogOne label facing towards the sky and securely attach the BulldogOne IK1 wiring harness to avoid them becoming dislodged. Do not mount in the engine bay or other area where it can get wet; next to radio equipment; between metal cavities in the vehicle or other parts of the vehicle where interference may be caused such as radio speakers. Read the BD1 User Guide and test all functionality, in a safe environment to ensure the immobiliser functions correctly 2. INSTALLATION Your BulldogOne needs registering before you can enjoy the full tracking experience at: www.bulldogtracking.co.uk/register During the registration you will need the serial number printed on the tracker. After successful registration, you will receive an email giving full details of the tracking service and how to track your BulldogOne via your smartphone. In this guide: text in red refers to a command / option in our tracking app and in blue refers to a reference image in this guide, Fig 2 and 3. 1. REGISTRATION BD1/201805-11/GEN-IK1 Fig. 1