Bush HERITAGE P1 Connect Manuals

1. GETTING STARTED: 2. SETUP WIZARD When your Heritage P1 is started for the first time, it runs through a setup wizard to configure settings for Press SCROLL/SELECT knob to start setting. date/time and network. Turn and then press SCROLL/SELECT knob to set w? Setup wizard Start no NO YES UONPJMN=ebofq^db=mN|npd=ENRMVMUF=`çîÉê=^êíJçJÉãÄJmobppKéÇÑ===N===ULMVLOMNR===OWMU=éã 1. GETTING STARTED: d Switch the main power switch to “POWER ON”. Press to turn the radio on. “Setup wizard” will be shown when switched on for the first time. 2. SETUP WIZARD When your Heritage P1 is started for the first time, it runs through a setup wizard to configure settings for Press SCROLL/SELECT knob to start setting. date/time and network. Turn and then press SCROLL/SELECT knob to set 12 or 24 hour format, synchronously update clock connection in all modes and select your network from DAB, FM, Network or No update. Keep network and insert the network password to connect. select your desired mode. Setup wizard is completed, press SCROLL/SELECT “Internet radio” being highlighted. Now, you can knob to exit. “Main menu” will be shown with When establishing a connection via WPS, you can select “Push Button” to press SCROLL/SELECT knob on eatablish connection; or select “PIN” to enter the your radio and SELECT button on your router to 8-digit number which is created by your radio into network password and then enter your password can select “Skip WPS” if you are using a standard your router to eastablish connection; also you to complete the connection. b Connect the power cord into the DC-In socket. Connect the plug to the mains socket. a c w? Setup wizard Start no NO YES during setup. In this case to disable the “keep network NOTE: When used outside of network range, this when the “keep network connection” setting is selected product will always scan for a network connection connection” go to MENU>MAIN MENU>SYSTEM SETTINGS NOTE: Keep connected to mains power for 6hrs to allow battery to be fully charged. >NETWORK>”Keep Network connected” and set to NO. 7. BLUETOOTH / NFC You can play music from any Bluetooth-enabled device through your Heritage P1. 8. UNDOK SMART APP CONTROL You can control the product using your smartphone with the UNDOK App installed. Multiroom and Control Volume, Mode & Stations using UNDOK for the products in the Press MODE button repeatedly to select “DAB” Mode. For initial use, radio will carry out a full scan and store available DAB stations in memory. Make sure Turn and then press SCROLL/SELECT knob to listen 5. LISTENING DAB RADIO Mode “DAB” lets you listen to all digital radio stations in clear crystal sound, with better reception and more choice. to your desired DAB stations. www.digitalradioplus.com.au To check if you have coverage in your area, visit: antenna is fully extended. 4. PLAY MUSIC VIA SPOTIFY CONNECT Your radio has Spotify Connect built-in, this lets you control the music on your radio using the Spotify App on your The Heritage P1 radio must be connected to the same network as your smartphone or tablet. Open the Spotify Tap the song cover image at the bottom left corner of the screen, and then tap the Spotify Tap “Heritage P1” from the list. smartphone, tablet or PC. App on your smartphone or tablet and play any song. Connect icon . 3. LISTENING INTERNET RADIO Mode “Internet Radio” lets you listen to thousands of global Internet radio stations and Podcasts. Press SCROLL/SELECT knob to select “Internet radio” in main menu. Turn and then press SCROLL/SELECT knob to select your desired Internet radio station or Podcast. BLUETOOTH Connect Spotify Bluetooth Mode Internet Mode Scan Stations: 12 Scanning 6. USING PRODUCT ON BATTERY Allow 6hrs for the battery to be fully charged. To use on battery disconnect power cable from the back of the Heritage P1. Press power switch to Product can run on battery for 8-10hrs at 2/3 volume. NOTE: When in standby this product will use battery “Power ON and then press the button”. power as the screen and network settings are active. To save the battery when not in use switch the main power switch on the back to “Power OFF”. kitchen, bedroom or living room.