CAMDEN CV-634W Manuals

Model CV-626/CV-634W Piezo Keypad W/ Wiegand Output Installation Instruction Page 1 of 2 Protocol: Wiegand 8 or 26bit with programmable Site Code Power Supply: 12 to 24 VDC Power Standby Consumption: 150 mA max Mounting: Single Gang Switch Box, or directly to the wall. Environment: IP68; 100% relative humidity Temperature: - 4° to + 158°F (- 20° to + 70°C) CLICK-N-LOCK mounting screw protection. 8 Bit Specifications: Keypad Protocols WIRING COLOR FUNCTION ELECTRICAL FUNCTION RED Input Voltage 12 - 24 VDC BLACK Ground GREEN Data 0 Open collector 2.2K ohm pull-up to internal +5V WHITE Data 1 Open collector 2.2K ohm pull-up to internal +5V BROWN LED Control “LOW” = Green LED BLUE LED Control Red LED constant unless Brown wire is “LOW” BROWN + BLUE LED Control “LOW” = Yellow LED GREY BUZZER Input “LOW” Activate Buzzer VIOLET CCTV Output Open collector 0.2 A activated with each key for 30 Sec. YELLOW Tamper Output Open collector 0.200 A “Low” when light sensed PINK HOLD Input “LOW” data is stored in Buffer, “HIGH” buffered data is sent KEY OUTPUT KEY OUTPUT 0 11110000 6 10010110 1 11100001 7 10000111 2 11010010 8 01111000 3 11000011 9 01101001 4 10110100 * 01011010 5 10100101 # 01001011 CV-626SW CV-634W

Model CV-634W Piezo Keypad W/ Wiegand Output Installation Instruction Protocol: Wiegand 26 Power Supply: 12 to 28 VDC Power Standby Consumption: less than 30 mA (40mA when illuminated) Mounting: Single Gang Switch Box, or directly to the wall. Environment: IP68; 100% relative humidity Temperature: - 40° to + 70°C CLICK-N-LOCK mounting screw protection. When the LED control input is pulled low, the GREEN LED will be ON and the RED LED will be OFF. When the input goes high the RED LED is ON and the GREEN LED is OFF. The RED LED will flash with each key press. The LED control input is pulled to the internal +5v with a 2.2K resistor. The data is sent at 1 msec per bit with a pulse duration of 50 usec. A Buzzer beeps with each key press. 26 BIT WIEGAND SPECIFICATIONS: WIRING COLOR FUNCTION ELECTRICAL FUNCTION RED Input Voltage (+) 8-25 VDC BLACK Input Voltage (-) GREEN Data 0 Open drain, 2.2K pull-up to internal +5V WHITE Data 1 Open drain, 2.2K pull-up to internal +5V BROWN LED Input ‘LOW’: LED=green, ‘OPEN’: LED=red BLUE CCTV output Open drain, max 0.25 A activated with each key for 30 Sec. VIOLET Housing Ground ORANGE Buffered Input ‘LOW’: Hold GREY Tamper Output Open drain, max 0.25A, ‘LOW’ when light sensed