CAMDEN CV-7600 Series Manuals

Page 1 of 5 Access Control and Telephone Entry 1. GENERAL DESCRIPTION A key component of a physical security electronic access control system, a mobile-ready reader combining BLE and contactless smart card technologies is based on RFID technology. In operation it is capable of reading data stored on a contactless smartcard credential via high frequency—or reading data from mobile credential stored in a smartphone’s wallet app via BLE technology—and without physical contact, and then passing the data obtained to the physical access control system. Access control systems typically manage and record the movement of individuals through a protected area, such as a locked door. CV-7600 Series-BLE Bluetooth Card Reader INSTALLATION INSTRUCTIONS 2- #6 x 1" Self-Tapping Screws 2- 6-32 x 1" Pan Head Phillips Screws 1- Single Gang Mounting Plate THIS PACKAGE INCLUDES: 3. SPECIFICATIONS (WITH CARD READER DRAWING) Input Voltage 8 to 14V AC/DC Current Draw 40 mA typical @ 12VDC 195 mA peak Frequency 13.56 MHz (contactless smartcard) 2.4 GHz (BLE) Cabling 24 AWG minimum, multi-conductor stranded with foil shield Interface Wiegand (26-bit formats), ABA Track II magnetic strike (clock & data) or OSDP Operating Temperature -40°F to 149°F (-40°C to 65°C) LED Control Blue, Red, Green, Amber and Off Read Range Physical: Up to 1.5" (38mm) Mobile: CV-7600: Up to 1 ft (30 cm) CV-7615: Up to 15 ft (4.6 m) Audio Tone Beeper included standard Protection IP67 Dimensions Mullion: 1 3/4"W x 11/16"H x 1 13/16"D (44mm x 119mm x 30mm) Switch Plate: 3"W x 5 1/8"H x 1 3/16"D (76mm x 130mm x 30mm) Notes: 1. Optimized for use with devices supporting BLE version 4.2. 2. Carrying the ETL Label and tested by Intertek, conforms to UL Standard 294. 3. Self evaluated. 4. Linear power supplies are recommended for best operation. 5. Using CV-MCS Clamshell Contactless Smartcard with 12 VDC at the reader (other credentials may be less). Read ranges subject to the smartphone used, the manner in which used, as well as the installation and it's environment. 6. Ex. Belden 9535 or similar, supporting the five conductors comprising the physical layer of the Wiegand interface (power, ground, data 0, data 1, and/or beeper and LED). Alternatively, Belden 9539 or similar, for all reader functions. Contact your access control system manufacturer for specific requirements. 7. CSN = Card Serial Number 1- 6-32 x 1/4" Pan Head Phillips Screw 1- 6-32 x 1/4" Tamper-Resistant Button Head Hex Drive Screw 2. CONEKT WALLET APP Instructions: 1) Using the target smartphone, download and install the Conekt Wallet App. The App can be found on the Apple Store or Google Play Store or by the following link: http://onelink.to/sb6srb 2) Once installed, launch the Conekt Wallet App, then select the "+" button to load a new Conekt Mobile Access Credential. 3) When prompted, enter the 16- character Conekt Registration Key. This will download and activate the Conekt Mobile Credential. The Conekt Registration Key may be manually entered or, using the associated QR code, scanned with the smartphone's camera. 4) The Conekt Mobile Access Credential will now appear in the Conekt Wallet App, ready to use.