Canon L24 Manuals

P/N:88M003A Warnings Items L24 - x1 L36 - x3 x 1 x 1(LHS) x 1(RHS) x 1 x 6 x 1 x 1 3mm x 2 x 1 x 1 x 5 x 1 x 1 80% 35% +95°F (+35°C) +50°F (+10°C) Beware of finger trap when opening or closing the scanner. Beware of exposed electrical connectors if covers removed. Keep out of direct sunlight. Do not shock. Keep dry. Operating Environment: Relative humidity 35% - 80% Temperature 10°C – 35°C

Installing the L Series Scanner for Direct Scanning & Copying Page 1 of 14 Canon Items Needed at the Installation Site: Standard Tool Kit L Series Scanners L24 & L36 Service Manual (available from the Colortrac Support Website) http://www.lseries.colortrac.com  User name: canon  Password: scann1ng (note the ‘i’ is a number 1) imagePROGRAF iPF670 or iPF770 Service Manual (for printer installation) Blank USB2 Flash drive, preformatted FAT 32; must be able to store at least 25Mb of data. This Flash drive can be used to update the scanner firmware. Please Note: Install the imagePROGRAF printer first and verify proper printer operation using roll media before proceeding to install the scanner. Scanner Unboxing & Initial Preparation: 1. Unbox the scanner, locate the following items in the scanner’s box and put each item aside for now: Scanner Power Supply Ethernet cable Document Return Guides: L24 model has 1 guide L36 model has 3 guides Calibration/Stitch Target/sheet 2 Scanner Mounting brackets and 2 Thumb screws 2. Attach both Scanner Mounting brackets on the imagePROGRAF printer by: 3.1. Removing the 4 printer covers shown below 3.2. Fit and mount both left and right brackets as shown below using the supplied screws. The screw locations are shown with 3 small red arrows. 3.3. Replace both left and right lower covers only, as shown with 1 large, dark blue arrow. Left Side bracket Right Side Bracket