CEBEK I-208 Manuals

E L E C T R O N I C C I R C U I T S DIGITAL TIMER - CONTROLLER TILL 1 MONTH.I-208 I-208 The I-208 module is a timer to control voltage a device. Specially recommended for renting apparatus, houses, games, etc... It includes a led to indicate its state as well as connection terminals to make more easy its assembly. OPERATING. TECHNICAL CHARACTERISTICS. Voltage. .............................................................................................12 V. DC. Minimum Consumption. ...................................................................12.6 mA. Maximum Consumption. ..................................................................47.3 mA. Operating timing. ..............................................................................1, 2, 3 or 4 Weeks. Maximum Output intensity. ..............................................................3 A. Protection against polarity inversion .................................................. Yes. POWER SUPPLY. The MODULE’S USING. The I-208 is a timer with a long cycle to control the use of devices.Specillay indicated for renting apparatus, electronic devices, renting houses, games, etc.... The circuit will maintain the operating during the selected time and it stops the device when the time is finished. Then, the owner’s “conformity“ will be necessary to activate again the apparatus. Indeed, when the module is activated it allows the controlled device to be supplied during one of the four times previously selected. At the end of the selected timing, the I- 208 module will disconnect the voltage and the controlled device could only be activated again for a similar timing till the I-208 is activated. This operation only could be done inserting an ”electronic key” supplied with the module. (See corresponding paragraphe). HOW TO SELECT OPERATING TIME. The I-208 module allows four different times, composing the module’s I-208 circuit had to be supplied by a 12 VDC power supply correctly filtered. We recommended you the FE-2 power supply which has been developed to perfectly answer to the circuit needs. Install a fuse and a switch has it is indicated on the schedule. Both are necessary for the module’s protection as well as for your own safety, as it is required by the “CE” regulations. Connect the positive of the power supply to the positive terminal indicated in the wiring map, then connect the negative of the power supply to the negative terminal indicated in the circuit. Verify that the assembly is correct. 1 HOW TO CONFIGURATE switches according to OPERATING TIME. Switches Switches How to place switches to select a timing corresponding to 1 week. How to place switches to select a timing corresponding to 3 weeks. 1 ON 2 1 ON 2 Switches Switches How to place switches to select a timing corresponding to 2 weeks. How to place switches to select a timing corresponding to 4 weeks. 1 ON 2 1 ON 2