Cefndy B43 Manuals

User Instruction for the Rise & Fall Table Range B43 Rise & Fall Table & B431 Low Height Version B430 with Wheelchair Friendly Base & B432 Low Height Version Ref: B43 Range March 2014 Form No: Cef 0035 1. Introduction The Rise & Fall Table is designed to aid the user for dining, reading or writing. This table offers luxury for both the user and the carer. Its spring-loaded easy rise and fall mechanism enables clients with poor grip to adjust by finger action only. It has a large table surface area and is adjustable in height. The beech polished top is hard wearing and easy to clean, and the retaining table edges prevent items slipping off. The B430 and B432 models have a U-Shaped frame that enables the products to be used over a bed or around a wheelchair. 2. Contents  User Instructions (this leaflet) 3. Assembly Instructions  Carefully unpack and examine the product to ensure that it is complete.  Before use, check for any signs of damage e.g. cracked weld, flaking of paint, bent tube. If any signs occur please contact your supplier to exchange and refrain from using the product. DO NOT ATTEMPT TO USE IF PRODUCT IS DAMAGED. 4. Correct Use  The table is designed to help the user by being used as a dining, reading, or writing aid.  The table is not intended to support full body weight so refrain from attempting to lift full body weight via the product  The table should be placed either against a bed or chair.  Do not attempt to overload the table. Height Adjustment:  To adjust the height of the table top, press and hold the locking bar situated on the side of the table, the table top will now freely move.  When the desired height is achieved release the locking bar, the table top will now lock into position.  To lower the table top height press and hold in the locking bar and press down on table top (at the column end) to the desired height and then release the locking bar. Product specification Rise (from-to) B43 & B430 750mm – 1100mm Rise (from-to) B431 & B432 630mm – 825mm Height of legs from floor 90mm Top size 810mm x 455mm Top size B430 780mm x 1114mm Footprint B43 & B431 810mm x 455mm Footprint B430 & B432 970mm x 440mm Parts list Description Part No Castors (Set of 4) 70023I/1 B43 Rise & Fall Table Spring loaded easy Rise & Fall mechanism