CHART CAIRE AirSep SeQual Eclipse 5 Manuals

Eclipse 5™ Transportable Oxygen Concentrator with autoSAT® Eclipse 5 New Features • NEW: All continuous flow and pulse flow settings available while operating on DC power • NEW: Battery cartridge will re-charge when unit is connected to DC power for all continuous flow settings up to 2.0 LPM and all pulse flow settings 1 to 9 • NEW: Next generation internal components enhance unit reliability Weight Eclipse 5 Only: 15.0 lb (6.8 kg); Eclipse 5 w/ Battery Installed: 18.4 lb (8.4 kg) Flow Rates Continuous Flow Pulse Flow 0.5 LPM 2.0 LPM 1.0 (16 mL) 3.0 (48 mL) 5.0 (80 mL) 8.0 (160 mL) 1.0 LPM 2.5 LPM 1.5 (24 mL) 3.5 (56 mL) 5.5 (88 mL) 9.0 (192 mL) 1.5 LPM 3.0 LPM 2.0 (32 mL) 4.0 (64 mL) 6.0 (96 mL) 2.5 (40 mL) 4.5 (72 mL) 7.0 (128 mL) Battery Life Continuous Flow Pulse Flow 0.5 LPM – 4.4 Hours 2.0 LPM – 2.0 Hours 1.0 (16 mL) – 5.4 Hours 4.0 (64 mL) – 4.0 Hours 7.0 (128 mL) – 2.5 Hours 1.0 LPM – 3.7 Hours 3.0 LPM – 1.3 Hours 2.0 (32 mL) – 5.1 Hours 5.0 (80 mL) – 3.7 Hours 8.0 (160 mL) – 2.0 Hours 3.0 (48 mL) – 4.9 Hours 6.0 (96 mL) – 3.5 Hours 9.0 (192 mL) – 1.7 Hours NOTE: Pulse flow times are calculated based on 12BPM. Higher breath rates will decrease battery times on pulse mode only. Quick RefeRence Guide Recharge Time 1. The typical time to recharge the battery inside the Eclipse on AC or DC power is between 2 - 5 hours, dependent upon the flow setting. The battery may be re-charged while the Eclipse is either ON or OFF. 2. The battery will recharge using the optional desktop charger in approximately 3 hours. 3. It is acceptable to leave the Eclipse plugged into AC power at all times while it is OFF. Note that while the unit remains plugged in and OFF, the internal fan may continue to run while the battery is charging and produce a faint humming noise. Battery Gauge The Eclipse 5 has a battery status gauge on the right side of the display screen. Each of the 5 horizontal gray bars represents approximately 20% of the total battery charge. When a battery is being charged, the indicator bars will blink in a waterfall-type fashion. If a battery is not installed, or is improperly installed, the battery status gauge will not appear on the screen. On/Off Press and hold the ON/OFF button (top left Blue Button) for two seconds to power on the Eclipse 5. Upon power up, the audible alarm should sound for 3 seconds, and all three lights on above the display screen should illuminate. It is normal for the yellow and/or red lights may remain on for up to 5 minutes during warm-up. Once warm-up is complete, only the green light should be on. Press and hold the ON/OFF button for two seconds to power off the Eclipse 5. Changing Flow Mode Press the flow mode button (bottom left blue button) to toggle between pulse and continuous flow. The light adjacent to the button will illuminate when in pulse mode and will blink with each breath detection and delivery. If the unit is in pulse mode but does not detect a breath, it will switch to continuous mode.