Chatsworth Products ELS1000 Manuals

3 pdf manual(s) Chatsworth Products ELS1000 for free download (Document Types: Installation instructions, Installation instructions manual)

Chatsworth Products ELS1000 Installation instructions [PDF] (4 pages)

  • Identifier: id-828423
  • Brand: Chatsworth Products
  • Device: ELS1000 Door locks
  • Type: PDF
  • Key Aspects: Efficiency and Calibration Tips, Advanced Configuration Methods, Cleaning and Sanitization Methods
  • UPD Date: 27.07.2026
  • Source File: 811339.pdf
  • Pages: 4
  • Description: Essential instructions for the Chatsworth Products ELS1000.
Pages Preview:
  • DOUBLE DOOR THREE-POINT ELS1000/ELS1500 LOCK Page 2 of 4 Installation Instructions 2. Place the ELS1000 with the Front plate border on the double door with spindle orientation up (Fig. 2) 3. Position the Rear plate from inside the double door over the latch cut-out and fasten to the lock with M4X12mm screw & M4 washer for ELS1000 lock (Fig. 2). 4. Place the M16 Nut over the lock Spindle (Fig. 2). 5. Install the 3 point cam into the Lock Spindle with M4X10m
  • DOUBLE DOOR THREE-POINT ELS1000/ELS1500 LOCK Page 3 of 4 Installation Instructions ELS1500 Assembly Sequence: 1. Install the Three point ELS1000 (Fig. 4) onto double door. 2. Place the ELS1500 with the Front plate border on the double door with spindle orientation up (Fig. 5) 3. Position the Rear plate inside the double door over the latch cut-out and fasten to the lock with M5X16mm screw (Fig. 5). Fig. 4 ELS1500 Lock Front plate Border ELS1500 ELS1500 loc
  • DOUBLE DOOR THREE-POINT ELS1000/ELS1500 LOCK Page 4 of 4 Installation Instructions 4. Insert the lock rods through the guides, with the short rod at the top and the long rod at the bottom of the door (Fig. 6). 5. Install the 3 point cam into the Lock Spindle with M6 X 35mm Hex screw & M10 washer on ELS1500 spindle (Fig. 7). 6. Insert the cam assembly pins through the short rod (on top) and the long rod (on bottom), then through the other half of the cam as
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DOUBLE DOOR THREE-POINT ELS1000/ELS1500 LOCK IIS-739225, 11/22/13, Rev. 1, CPI/ 800-834-4969 (USA & Canada) • www.chatsworth.com • [email protected] For international phone numbers, see our website or contact CPI Tech Support. This drawing contains proprietary and confidential information and is protected by U.S. and international law. Unauthorized reproduction, disclosure or use of the drawing or the information therein is expressly forbidden except as agreed to in writing by Chatsworth Products, Inc. Page 1 of 4 Installation Instructions Included Hardware: ELS1000 Master Kit: M4 Washer, 1 ea. M4X12mm screw 1 ea. M10 Washer, 1 ea. M6 X11mm Clevis Pin, 2 ea. 6 mm E-ring Ext., 2 ea. ELS1000 latch box contains a set of standard fasteners, please select the items below from the box: M4X10mm Flanged Screw: 1 ea. M16 Nut: 1 ea. ELS1500 Master Kit: M10 washer, 1 ea. M5 X 16mm screw, 2 ea. M6 X 35mm Hex screw, 1 ea. M6 X 11mm Clevis Pin, 2 ea. 6 mm E-ring Ext., 2 ea. Please select the spindle shown below from the ELS1500 latch box: Tools Required: #2 Phillips screw driver 19 mm Wrench 10 mm wrench ELS1000/1500 Lock Preparation: Locate the batteries from the lock box and install in the latch before assembly. Please refer to the following Instruction documents for configuring the locks: IIS-739226 (ELS1000), ISS-739228 (ELS1500). Installation Notes: • The cabinet door must be disassembled in order to install or remove a two-point latch, because the lock rods extend beyond the top and bottom of the door. ELS1000 Assembly Sequence: 1. Install the Three point ELS1000 (Fig. 1) onto double door. E-ring Front plate Border ELS1000 ELS1000 lock Rear plate ELS1000 Lock rod M4 X 12mm screw Clevis pin Cam M16 nut Fig. 1 ELS1000 Lock M4 X 10mm screw M10 Washer M4 Washer 0.787” (20 mm)

Chatsworth Products ELS1000 Installation instructions manual [PDF] (6 pages)

  • Identifier: id-1542988
  • Brand: Chatsworth Products
  • Device: ELS1000 Locks
  • Type: PDF
  • Key Aspects: Storage and Care Recommendations, System Connectivity and Wiring Basics, FAQ Section for Common Queries
  • UPD Date: 23.07.2026
  • Source File: 1458288.pdf
  • Pages: 6
  • Description: Installation instructions for the Chatsworth Products ELS1000.
Pages Preview:
  • TERAFRAME ® FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 2 of 6 Installation Instructions 2. Install lock rod guide brackets in the top and bottom door. Do not insert the lock rods yet (Fig. 2). 3. Position the Rear plate inside the door over the latch cut-out and fasten with two M4X10mm screws and M4 Tooth washer under each screw head. The Tooth washer provides an electrical bonding point (Fig. 2). 4. Place the ELS1000 lock with the Front plate border
  • TERAFRAME ® FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 3 of 6 Installation Instructions 6. Place the M16 Nut over the lock spindle, push the cam onto the cam spindle (Fig.4). 7. Fasten the cam into the Lock spindle with M4X10mm flanged screws and M10 washer in ELS1000 locks (Fig. 4). 8. Insert the lock rods through the guides, with the short rod on the top and the long rod on the bottom (Fig. 5). 9. Insert the cam assembly pins through the short rod (
  • TERAFRAME ® FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 4 of 6 Installation Instructions ELS1500 Lock Assembly Sequence: 1. Install the two point ELS1500 (Fig. 6) onto TeraFrame front door. 2. Install lock rod guide brackets in the top and bottom door. Do not insert the lock rods yet (Fig. 7). 3. Position the Rear plate inside the door over the latch cut-out and fasten with two M4X10mm screws and M4 Tooth washer under each screw head. (Fig. 7). Door ba
  • TERAFRAME ® FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 5 of 6 Installation Instructions 4. Place the ELS1500 lock with the Front plate border in front door with spindle orientation up and rear plate from other side of the door (Fig. 8). 5. Secure the ELS1500 lock to the rear plate with the M5 X 16mm screws in the top and bottom holes (Fig. 8). 6. Insert the cam into the Lock spindle and fasten with M6 X 35mm screws and M10 washer in ELS1500mm Lock (Fi
  • TERAFRAME ® FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 6 of 6 Installation Instructions 7. Insert the lock rods through the guides, with the short rod on the top and the long rod on the bottom (Fig. 10). 8. Insert the cam assembly pins through the short rod (on top) and the long rod (on bottom), then through the other half of the cam assembly (Fig. 10) and locked with-ring. Lock rod Lock rod Guide Clevis Pin E-ring Fig. 10 ELS1500 Lock
Document Preview & Text Transcription (Main Page)
Click to expand and read text
TERAFRAME ® FRONT DOOR TWO-POINT ELS1000/ELS1500 LOCK IIS-739229, 11/27/13, Rev. 1, CPI/ 800-834-4969 (USA & Canada) • www.chatsworth.com • [email protected] For international phone numbers, see our website or contact CPI Tech Support. This drawing contains proprietary and confidential information and is protected by U.S. and international law. Unauthorized reproduction, disclosure or use of the drawing or the information therein is expressly forbidden except as agreed to in writing by Chatsworth Products, Inc. Page 1 of 6 Installation Instructions Included Hardware: ELS1000 Master kit: M4X10mm Taptite screw 2 ea. M4 Tooth Washer 2 ea. M4 Washer, 1 ea. M4 X 12mm screw 1 ea. M6 X 11mm Clevis Pin, 2 ea. 6 mm E-ring Ext., 2 ea. M10 Washer,1 ea. ELS1000 latch box contains a set of standard fasteners, please select the items below from the box: M4 X 10mm Flanged Screw: 1 ea. M16 Nut: 1 ea. ELS1500 Master Kit: M4X10mm Taptite screw 2 ea. M4 Tooth Washer 2 ea. M10 washer, 1 ea. M5 X 16mm screw, 2 ea. M6 X 35mm Hex screw, 1 ea. M6 X 11mm Clevis Pin, 2 ea. 6 mm E-ring Ext., 2 ea. M10 washer, 1ea. Please select the spindle below from the ELS1500 latch box: Tools Required: #2 Philips screw driver 19 mm Wrench 10 mm wrench Rivet gun ELS1000/1500 Lock Preparation: Locate the batteries from the lock box and install in the latch before assembly. Please refer to the following Instruction documents for configuring the locks: IIS-739226 (ELS1000), ISS-739228 (ELS1500). Installation Notes: • The cabinet door must be disassembled in order to install or remove a two-point latch, because the lock rods extend beyond the top and bottom of the door. ELS1000 Lock Assembly Sequence: 1. Install the two point ELS1000 (Fig. 1) onto TeraFrame front door. E-ring Front plate 2 ELS1000 Front plate Border ELS1000 ELS1000 lock Rear plate ELS1000 M4 X 10mm taptite screw Lock rod M4 X 12mm screw M4 Tooth washer Clevis pin Cam M16 nut Fig. 1 ELS1000 Lock M4 Washer M4X10mm Flanged screw M10 Washer 0.787” (20 mm)

Chatsworth Products ELS1000 Installation instructions [PDF] (5 pages)

  • Identifier: id-828422
  • Brand: Chatsworth Products
  • Device: ELS1000 Door locks
  • Type: PDF
  • Key Aspects: Periodic Inspection Checklists, System Architecture and Design Overview, System Connectivity and Wiring Basics
  • UPD Date: 30.05.2026
  • Source File: 811340.pdf
  • Pages: 5
  • Description: Complete user documentation for the Chatsworth Products ELS1000.
Pages Preview:
  • REAR SOLID DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 2 of 5 Installation Instructions 2. Install lock rod guide brackets on top and bottom of rear door. Do not insert the lock rods yet (Fig. 2). 3. Position the ELS1000 lock with spindle orientation up and Front plate on the door over the latch cut-out and fasten with Rear plate using M4X12mm screws and M4 washer (Fig. 2). 4. Place the M16 Nut over the lock barrel and tighten it (Fig. 2). 5. Fasten the cam i
  • REAR SOLID DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 3 of 5 Installation Instructions 6. Insert the lock rods through the guides, with the short rod on the top and the long rod on the bottom (Fig. 4). 7. Insert the cam assembly pins through the short rod (on top) and the long rod (on bottom), then through the other half of the cam assembly (Fig. 4) and locked with-ring. Lock rod Lock rod Guide Clevis Pin E-ring Fig. 4 ELS1000 Lock Rod Installation
  • REAR SOLID DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 4 of 5 Installation Instructions ELS1500 Assembly Sequence 1. Install the two point ELS1500 (Fig. 5) onto rear solid door. 2. Install lock rod guide brackets on top and bottom of rear door. Do not insert the lock rods yet (Fig. 6). 3. Position the ELS1500 lock with spindle orientation up and Front plate on the door over the latch cut-out and fasten with Rear plate using M5X16mm screws (Fig. 6). 4. Insert
  • REAR SOLID DOOR TWO-POINT ELS1000/ELS1500 LOCK Page 5 of 5 Installation Instructions 5. Insert the cam assembly pins through the short rod (on top) and the long rod (on bottom), then through the other half of the cam assembly (Fig. 7) and locked with-ring. Lock rod Lock rod Guide Clevis Pin E-ring Fig. 7 ELS1500 Lock Rod Installation
Document Preview & Text Transcription (Main Page)
Click to expand and read text
REAR SOLID DOOR TWO-POINT ELS1000/ELS1500 LOCK IIS-739227, 02/18/13, Rev. 1, CPI/ 800-834-4969 (USA & Canada) • www.chatsworth.com • [email protected] For international phone numbers, see our website or contact CPI Tech Support. This drawing contains proprietary and confidential information and is protected by U.S. and international law. Unauthorized reproduction, disclosure or use of the drawing or the information therein is expressly forbidden except as agreed to in writing by Chatsworth Products, Inc. Page 1 of 5 Installation Instructions Included Hardware: ELS1000 Master Kit: M4X12mm screw 1 ea. M4 Washer, 1 ea. M10 Washer, 1 ea. M6 X 11mm Clevis Pin, 2 ea. 6 mm E-ring Ext., 2 ea. ELS1000 latch box contains a set of standard fasteners, please select the items shown below from the box: M4X10mm Flanged Screw: 1 ea. M16 Nut: 1 ea. ELS1500 Master Kit: M10 washer, 1 ea. M5X16mm screw, 2 ea. M6X35mm Hex screw, 1 ea. M6 X 11mm Clevis Pin, 2 ea. 6 mm E-ring Ext., 2 ea. Please select the spindle below from the ELS1500 latch box: Tools Required: #2 Philips screw driver. 19 mm Wrench Rivet gun Installation Notes: • The cabinet door must be disassembled in order to install or remove a two-point latch, because the lock rods extend beyond the top and bottom of the door. ELS1000 Assembly Sequence 1. Install the two point ELS1000 (Fig. 1) onto rear solid door. M10 Washer E-ring Front plate Border ELS1000 ELS1000 Rear plate ELS1000 Lock rod M4 X 12mm screw Clevis pin Cam M16 nut Fig. 1 ELS1000 Lock M4 Washer M4 X 10mm screw flanged 0.787” (20 mm)

Chatsworth Products ELS1000: Door locks, Locks Category Related Instructions

FE575
Schlage FE575
04.05.2026 8 pages

*23780026* 23780026 Prepare for Installation IMPORTANT NOTES • DO NOT use a power drill for installation! • Use a screwdriver to remove product from packaging. • Install and test lock with door open to avoid being locked out. A Check door dimensions. See Setup instructions for the Schlage FE575 Locks. The guide explains setup and operation, performance details, maintenance.

CODELOCK CL5500 Series
tell CODELOCK CL5500 Series
09.04.2026 2 pages

Tell Manufacturing | A Division of Spectrum Brands Inc. 1-800-433-4047 | TEL035007-CL5500-111021 Tell Manufacturing | A Division of Spectrum Brands Inc. 1 4 1-800-433-4047 | TEL035007-CL5500-111021 INSTALLATION OF CL5510 LOCKS Installation holes must be dr Device technical manual for the tell CODELOCK CL5500 Series Door locks. It explains operation, maintenance, and software updates, installation guides, device overview, device safety checks.

DHPA8005
Vicenza Designs DHPA8005
06.07.2026 2 pages

Headquarters: 4675 Vandenberg Dr., N. Las Vegas, NV 89081 • (800) 932-2358 or (702) 651-1304 • Fax (702) 651-1303 www.VicenzaDesigns.com INSTRUCTIONS FOR INSTALLATION INCLUDED PARTS 1- Passage Latch 2- Face Plate 3- 2 Wood Screws 4- 2 Nylon Self Alignment Stepwise user guide for the Vicenza Designs DHPA8005 Door locks. This guide describes features and hardware setup, user preferences, troubleshooting guides, security instructions.

697460
ikonic 697460
06.05.2026 2 pages

Sliding Door Double Cylinder Lock Very Important! Please fasten all screws by hand and not an electric screwdriver or drill, as over tightening is not recommended. Step 2: Installation of Handle - Please note the Black Markings on Cylinders and Tail Pieces. In Detailed user guide for the ikonic 697460 Door locks. It details operating modes and safety, operational guidelines, compatibility information, safety protocols.