Chauvet Freedom Par Hex-4 Manuals

Quick Reference Guide Freedom Par Hex-4 QRG EN 2 About This Guide The Freedom Par Hex-4 Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and DMX values. For more information, download the User Manual from the Chauvet website: http://www.chauvetlighting.com/product-manuals-literature/. Disclaimer The information and specifications contained in this QRG are subject to change without notice. Safety Notes The following Safety Notes include important information about installation, use, and maintenance. • Always connect the product to a grounded circuit. • Make sure the power cord is not crimped or damaged. • Always disconnect the product from the power source before cleaning it or replacing the fuse. • Never disconnect the product from the power source by pulling or tugging on the cord. • If mounting the product overhead, make sure there is adequate support for the product’s weight and always secure the product using a safety cable. • Make sure there are no flammable materials close to the product when it is operating. • Avoid direct eye exposure to the light source while the product is on. • Do not touch the product’s housing when the product is operating because the housing can be very hot. • The product is not intended for permanent installation. • The product is for indoor use only. It is rated at IP20. • Do not expose the product to rain or moisture. • Always connect the product to a power source that is within the voltage range stated on the label or rear panel of the product. • Never connect the product to a dimmer or rheostat. • Make sure to replace the fuse with another of the same type and rating. • Always install the product in a location with adequate ventilation. • Always leave at least 20 in (50 cm) between the product and adjacent surfaces. • Be sure that no ventilation slots on the product’s housing are blocked. • Do not operate the product at an ambient temperature higher than 104 °F (40 °C). • Never carry the product by the power cord or any moving part. • Always use the mounting clamp or carry handle to lift the product. • If there is a serious operating problem, stop using the product immediately. • Never try to repair the product. Repairs carried out by untrained people can lead to damage or malfunction. • To eliminate wear and improve its lifespan, during periods of non-use completely disconnect from power via breaker or by unplugging it. Contact Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact your distributor to request support or return a product. Visit www.chauvetlighting.com for contact information. Freedom Par Hex-4 QRG EN 3 What Is Included • Freedom Par Hex-4 • Power Cord • IRC-6 • Warranty Card • Quick Reference Guide To Begin Carefully unpack the Freedom Par Hex-4 and check that all the parts are in the package, and are in good condition. If the box, or any of the contents, appear damaged from shipping, or show signs of mishandling, save all packaging and file a claim with the carrier immediately, do not notify Chauvet. Failure to report damage to the carrier immediately, or failure to have all packaging available for inspection, could invalidate your claim. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery. For information on contacting Chauvet, see Contact Us at the end of this QRG. Description The Freedom Par Hex-4 is a wireless, battery-operated, hex-color LED wash fixture. It can be used as an uplight on the floor or suspended overhead. It has a compact design that works with TRUSST®, and an adjustable kickstand for easy floor placement. The RGBAW+UV LEDs allow for infinite color mixing with the added punch of ultra-violet light. The built-in wireless D-Fi transmitter and receiver allow wireless Master/Slave control of up to 32 Freedom Par Hex-4s. The Freedom Par Hex-4 can also be controlled with a D-Fi compatible controller, such as the Chauvet Obey 40 D-Fi. Overview AC Power Freedom Par Hex-4 has an auto-ranging power supply that works with a voltage range of 100–240 VAC, 50/60 Hz. To eliminate wear and improve its lifespan, during periods of non-use completely disconnect from power via breaker or by unplugging it. Infrared Sensor On/Off Switch Display DMX In DMX Out Menu Buttons Power In Power Out Fuse Holder Battery Life Indicator LEDs Kickstand Carry Handle Glare Shield Microphone D-Fi™ AUTO Sync/Clear Button