Chuango SPS-260 Manuals

Product Overview The strobe outdoor siren can be used as a wireless siren by connecting to the control panel as well as a standalone alarm system to work with wireless accessories in same frequency by learning. The solar-powered siren is a totally wireless siren, designed to help protect yards, driveways, gardens and all types of other external locations. The strobe siren is battery powered and kept re-charging by the built-in solar panel. The signal transmission is all by wireless radio frequency which achieves significantly wirefree transmission and enhances the flexibility to install. Users can install some outdoor strobe sirens to deter the intruders in Omni-directional guard. SPS-260 Solar-Powered Siren User Manual PCB Layout 2minutes Siren Duration Setting 5minutes 5MIN 2MIN 30S 5MIN 2MIN 30S Volume Setting High (default) Mute HIGH MUTE LOW HIGH MUTE LOW HIGH MUTE LOW Low Jumper Setup 30seconds (default) 5MIN 2MIN 30S 1. Load the 9V battery. 2. Set the volume and duration of the siren. 3. Start to use by pressing the power button on. Connect to Alarm Panel Press the learning button (0.5 seconds), the wireless siren goes into connecting status after one beep is heard. Press or button on Arm the panel. The wireless siren is connected successfully with the control panel after another beep. To give up the connection, press the learning button again to exit. Note: Please don't trigger any accessory during connecting with alarm panel. Usage Work as a Wireless Siren After connected to the alarm panel, the siren will hoot and the strobe light will flash when the alarm panel alarms. Getting Started External Tamper Switch Note: The status LED will flash once every 5 seconds in arm status. It will not flash when in disarm status. The siren will sound immediately if the tamper switch is triggered. Learning Button Internal Tamper Switch Status LED Indicator Alarm LED Indicators Volume Setting Siren Duration Setting Power On/Off 18650 9V 6F22