Cisco 3800 Series Manuals

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 20 Data Sheet Cisco 1861 and Cisco 2800, 3800, 2900, 3900, and 3900E Series Integrated Services Router Interoperability with Cisco Unified Communications Manager Cisco® 1861 and Cisco 2800, 3800, 2900, 3900, and 3900E Series Integrated Services Routers can be deployed as unified communications routers as part of the Cisco Unified Communications and Collaboration Solution. New and existing deployments can benefit by using any of these routers as unified communications gateways with Cisco Unified Communications Manager. Cisco 1861 and Cisco 2800, 3800, 2900, 3900, and 3900E Series unified communications routers communicate directly with Cisco Unified Communications Manager, allowing for the deployment of unified communications solutions that are ideal for small and medium-sized businesses, large enterprises, and service providers that offer managed network services. The Cisco 1861 and Cisco 2800, 3800, 2900, 3900, and 3900E Series Routers provide a highly flexible and scalable solution for small and medium-sized branch and regional offices. The Cisco 1861 and Cisco 2800, 3800, 2900, 3900, and 3900E Series unified communications routers support a wide range of packet telephony-based voice interfaces and signaling protocols within the industry, providing connectivity support for more than 90 percent of the world’s private branch exchanges (PBXs) and public-switched- telephone-network (PSTN) connection points. Signaling support includes T1/E1 Primary Rate Interface (PRI), T1 channel associated signaling (CAS), E1-R2, T1/E1 QSIG protocol, T1 Feature Group D (FGD), Basic Rate Interface (BRI), foreign exchange office (FXO), ear and mouth (E&M), and foreign exchange station (FXS). You can configure these unified communications routers to support from 2 to 720 voice channels. Additionally, you can use these unified communications routers to terminate Session Initiation Protocol (SIP) trunking into the enterprise or branch office by enabling the Cisco Unified Border Element features. Additional details are available in the Cisco Unified Border Element data sheet. As your enterprise seeks to deploy an expanding list of unified communications applications and services, Cisco 1861 and Cisco 2800, 3800, 2900, 3900, and 3900E Series unified communications routers - interoperating with Cisco Unified Communications Manager - can provide a solution that will grow with your changing needs. Interoperability Using SIP, H.323, or MGCP The unified communications routers can communicate with the Cisco Unified Communications Manager using Session Initiation Protocol (SIP), H.323, or Media Gateway Control Protocol (MGCP): ● In SIP and H.323 mode, the unified communications routers communicate with Cisco Unified Communications Manager as intelligent gateway devices. ● In MGCP mode, these routers operate as stateless clients, giving Cisco Unified Communications Manager full control. Dial plans are configured centrally in Cisco Unified Communications Manager. Then you can automatically configure voice-gateway routers by downloading XML files.

All contents are Copyright © 1992–2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement. Page 1 of 1 Data Sheet Cisco E1/T1 ISDN PRI Network Modules for Cisco 2610-51XM, 2800, 2691, 3660, 3700 and 3800 Series Routers The versatility of Cisco ® 2610-51XM, 2800, 2691, 3660, 3700 and 3800 series routers is demonstrated by their broad support of E1/T1 connectivity and Integrated Services Digital Network Primary Rate Interfaces (ISDN PRI). Customers continue to deploy E1 and T1 circuits for Wide Area Network (WAN) connectivity, ISDN dial-backup, and digital modem termination in the Power Branch Office Environment. Cisco now makes it possible to terminate T1 and E1 PRI connections in a single network module. Available in single and dual port models, the NM-1CE1T1-PRI and NM-2CE1T1-PRI cards coupled with Cisco 2610-51XM, 2800, 2691, 3660, 3700 and 3800 Series routers, enhance and simplify customers’ WAN connectivity options (Figure 1). Figure 1. Single-Port E1/T1 ISDN PRI Network Module (NM-1CE1T1-PRI) The Cisco E1/T1 ISDN PRI Network Module’s integrated channel service unit (CSU) provides direct connection to the Telecommunications network, thus allowing customers to consolidate customer premises equipment (CPE). This provides multifunction dial access aggregation, routing functionality, VPN and firewall security, and other capabilities right inside the Cisco router in power branch office environments. Both the 1-port and 2-port versions offer support for balanced and unbalanced E1 connectivity and conform easily to customers’ specific applications. The Cisco E1/T1 ISDN PRI network modules also supply connectivity for internal digital modems in the Cisco 3660, 3700 and 3800 series routers, with connectivity options for PRI, T1 channel associated signaling (T1-CAS), and E1-CAS R2 signaling. This provides for a high concentration of V.92-compatible modems, while still allowing expandability for other critical services. FEATURES AT-A-GLANCE • Cisco IOS ® Software configurable for T1 or E1 operation • Balanced or unbalanced E1 termination in the same module • Integrated CSU/DSU (channel service unit/data service unit) per port • Full or fractional E1/T1—can be fully channelized • Supports PRI for data, T1-CAS, and E1-CAS R2 signaling • E1 unframed and framed modes (G.703/G.704) available • Interoperates with NM-xDM digital modem network modules • Bantam (tty) jacks for easy network monitoring • V.54 loopback compatible

Quick Start Guide Cisco 3800 Series Integrated Services Routers Quick Start Guide INCLUDING LICENSE AND WARRANTY 1 Cisco 90-Day Limited Hardware Warranty Terms, Page 2 2 Overview, Page 3 3 Documents, Equipment, and Tools, Page 4 4 Install Chassis, Page 5 5 Connect Cables, Page 16 6 Power Up the Router, Page 24 7 Port Numbering, Page 27 8 Perform Initial Configuration, Page 28 9 Where to Go Next, Page 32 10 Obtaining Documentation, Page 33 11 Documentation Feedback, Page 33 12 Obtaining Technical Assistance, Page 33 13 Obtaining Additional Publications and Information, Page 34

1 Introduction to Hardware Documentation OL-5965-01 Introduction to Cisco 3800 Series Routers Hardware Documentation This introduction discusses the objectives, audience, and conventions of hardware documentation for Cisco 3800 series integrated services routers, and describes related documents where you can find additional information. It contains the following sections: • Objectives and Organization, page 1 • Audience, page 2 • Conventions, page 2 • Safety Warnings, page 3 • Related Documentation, page 9 • Cisco 90-Day Limited Hardware Warranty Terms, page 10 • Obtaining Documentation, page 11 • Documentation Feedback, page 12 • Obtaining Technical Assistance, page 12 • Obtaining Additional Publications and Information, page 13 Objectives and Organization This series of documents provides comprehensive hardware information for Cisco 3800 series integrated services routers. It includes the following modules: • Overview of Cisco 3800 Series Routers • Preinstallation Requirements and Planning for Cisco 3800 Series Routers • Installing Cisco 3800 Series Routers in an Equipment Rack • Connecting Cables to Cisco 3800 Series Routers • Powering Up Cisco 3800 Series Routers • Troubleshooting Cisco 3800 Series Routers • Installing Network Modules in Cisco 3800 Series Routers • Installing Interface Cards in Cisco 3800 Series Routers • Installing SFP Modules in Cisco 3800 Series Routers

Password Recovery Procedure for the Cisco 3600 and 3800 Series Routers Document ID: 22189 Contents Introduction Prerequisites Requirements Components Used Related Products Conventions Step−by−Step Procedure Example of Password Recovery Procedure Related Information Introduction This document describes how to recover the enable password and the enable secret passwords. These passwords protect access to privileged EXEC and configuration modes. The enable password password can be recovered, but the enable secret password is encrypted and must be replaced with a new password. Use the procedure described in this document in order to replace the enable secret password. Prerequisites Requirements There are no specific requirements for this document. Components Used The information in this document is based on these hardware versions: • Cisco 3600 Series Router Cisco 3800 Series Router • The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command. Related Products Refer to Password Recovery Procedures for information on how to recover passwords for related products. Conventions Refer to Cisco Technical Tips Conventions for information on document conventions.

Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA © 2007, 2009 Cisco Systems, Inc. All rights reserved. Configuring Radio Settings on an Access Point This module describes how to configure radio settings on a Cisco 800, 1800, 2800, or 3800 series integrated services router, hereafter referred to as an access point (AP). Finding Feature Information in This Module Your Cisco IOS software release may not support all of the features documented in this module. To reach links to specific feature documentation in this module and to see a list of the releases in which each feature is supported, use the “Feature Information for Configuring Radio Settings on an Access Point” section on page 29. Finding Support Information for Platforms and Cisco IOS Software Images Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear. Contents • Information About Configuring Radio Settings on an Access Point, page 2 • How to Configure Radio Settings on an Access Point, page 3 • Configuration Examples for Radio Settings on an Access Point, page 27 • Additional References, page 28 • Feature Information for Configuring Radio Settings on an Access Point, page 29

For teleworkers, small offices, small to medium-sized businesses, and enterprise branch and head offices Cisco Router Guide Winter 2009 V.5 Cisco Router Guide Cisco Integrated Services Routers: Cisco 850, 870, 1800 (fixed), 1800 (modular), 2800, 3800 Series; Cisco Aggregation Routers: Cisco 7200, 7300, ASR 1000, 7600, Catalyst 6500 Series Winter 2009 V.5