Cisco 6200 Manuals

78-5294-02 10/02/98 Cisco Systems, Inc. All rights reserved. 170 West Tasman Drive San Jose, CA 95134-1706 USA Cisco Systems, Inc. Corporate Headquarters Copyright © 1998 1 Cisco 6200 FRU Installation and Replacement Read this document to learn how to install and remove field-replaceable units (FRUs) in the Cisco 6200 advanced digital subscriber line access multiplexer (DSLAM). A Cisco 6200 DSLAM contains at least one of each of these FRUs: • Network trunk card (NTC) • Management processor card (MPC) • Subscriber line card (SLC) • Power entry module (PEM) • Fan tray with air filter • Dangler cable This document includes the following sections: • Installing and Removing Cards, page 2 • Installing and Removing a Power Entry Module (PEM), page 8 • Installing and Removing a Fan Tray, page 10 • Installing and Removing Dangler Cables, page 12 Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or through an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com. If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments. The safety warnings in this document have been translated into several foreign languages. See Appendix C, “Translated Safety Warnings,” in the Cisco 6200 User Guide.

C H A P T E R Cisco 6200 User Guide 1-1 1 Hardware Description This chapter provides an overview of the Cisco 6200 advanced digital subscriber line access multiplexer (DSLAM) and describes the system’s hardware components. The chapter is arranged as follows: • Cisco DSL Product Family on page 1-1 • Cisco 6200 Chassis on page 1-2 • Network Trunk Cards (NTCs) on page 1-9 • Management Processor Card (MPC) on page 1-18 • Subscriber Line Card (SLC) on page 1-22 Warning For translations of the safety warnings in this chapter, see Appendix C, “Translated Safety Warnings.” 1.1 Cisco DSL Product Family The Cisco 6200 is part of a family of digital subscriber line (DSL) products that provide end-to-end service, carrying data between the subscriber’s home or office, the telephone central office (CO), and the networks beyond. The Cisco 6000 family includes the following members: • The Cisco 6200 DSLAM is a CO-grade multiplexer that supports up to 80 asymmetric digital subscriber line (ADSL) ports. The Cisco 6200 sends and receives subscriber data (often Internet service) over existing copper telephone lines, concentrating all traffic onto a single high-speed trunk for transport to the Internet or the enterprise intranet. • ADSL customer premises equipment (CPE) devices, which reside at the subscriber site connected to PCs or routers, modulate data so that it can travel over telephone lines to the Cisco 6200 DSLAM at the CO. CPE devices in the Cisco DSL product family include the Cisco 675 and the Cisco 605. • The Cisco 6200 Manager is an SNMP-based element management application that provides configuration, monitoring, and management support. The Cisco 6200 Manager offers a graphical user interface and runs under Windows NT 4.0 and higher. A separate console interface to the Cisco 6200 DSLAM provides command line access to all management services. • ADSL plain old telephone service (POTS) splitters, or voice filters, located both at the subscriber premises and at the CO, support simultaneous voice and data transmission. (If a subscriber is using a telephone line for data only, the POTS splitter connection is not required.)