Cisco Catalyst 2810 Series Manuals

Connecting a Terminal to the Console Port on Catalyst Switches Document ID: 10600 Contents Introduction Before You Begin Conventions Prerequisites Identifying a Rollover Cable, Straight-through, and Crossover Cable Connecting a Terminal to Catalyst 1900/2820, 2900/3500XL, 2940, 2950, 2970, 3550, and 3750 Series Switches Connecting to a Terminal Connecting a Terminal to Catalyst 2948G-L3, 4908G-L3, and 4840G Series Switches Console Port Pinouts Connecting a Terminal to Catalyst 2926 and 2926G Series Switches Catalyst 2926G Series Switch Connecting a Terminal to the Catalyst 5000 Supervisor Engine I and II Console Port Configuring a Terminal for Attachment to the Console Port Connecting a Terminal to the Catalyst 5000 Supervisor Engine III Console Port Configuring a Terminal for Attachment to the Console Port Connecting a Terminal to the Catalyst 5000 Supervisor Engine II G and III G Console and RSFC Ports Console Port Mode Switch Configuring a Terminal for Attachment to the Console or RSFC Port Connecting a Terminal to the Catalyst 4000 Supervisor Engine I Console Port Connecting a Terminal to the Catalyst 4000/4500 Supervisor Engine II/II+/III/IV, 2948G, 2980G, and 4912G Catalyst 6000/6500 Supervisor Engine I, II and 720 Console Port Signals and Pinouts Console Port Mode Switch Console Port Mode 1 Signaling and Pinouts Console Port Mode 2 Signaling and Pinouts Cisco - Connecting a Terminal to the Console Port on Catalyst Switches http://www.cisco.com/warp/public/473/9.html (1 of 19) [9/4/2003 12:36:02 PM]