Cisco Catalyst 3560-C Manuals

C H A P T E R 2-1 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 2 Switch Installation This chapter describes how to start your switch and how to interpret the power-on self-test (POST) that ensures proper operation. It also describes how to install the switch. Read the topics and perform the procedures in this order: • Preparing for Installation, page 2-1 • Verifying Switch Operation, page 2-5 • Mounting the Switch, page 2-5 • Installing a Cover for the Reset Button (Optional), page 2-24 • Installing the Power Cord Retainer (Optional), page 2-25 • Installing the Cable Guard (Optional), page 2-28 • Connecting Devices to the Ethernet Ports, page 2-33 Preparing for Installation • Warnings, page 2-1 • Installation Guidelines, page 2-3 • Equipment That You Supply, page 2-4 • Box Contents, page 2-4 • Powering the Switch, page 2-4 Warnings These warnings are translated into several languages in the Regulatory Compliance and Safety Information for the Catalyst 3560-C and the 2960-C Switches guide. Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43

1 Catalyst 3560-C and 2960-C Switch Getting Started Guide OL-23802-02 Catalyst 3560-C and 2960-C Switch Getting Started Guide • About This Guide • Box Contents • Running Express Setup • Managing the Switch • Installing the Switch • Connecting to the Switch Ports • In Case of Difficulty • Obtaining Documentation and Submitting a Service Request

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide March 2013 Text Part Number: OL-23803-02