Cisco NIM-ES2-8 Manuals

Installing the Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Module InstallingtheCisco4-Portand8-PortLayer2GigabitEtherSwitchNetwork Interface Module August 19, 2016 This guide describes how to install the Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Module (Cisco NIM-ES2-4 and Cisco NIM-ES2-8) in the Cisco 4000 Series Integrated Services Router (ISR) and how to connect the NIM-ES2 to your network. Contents This guide contains the following sections: About the Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Module This section describes the Cisco NIM-ES2-4 and Cisco NIM-ES2-8. It contains the following sections: Cisco NIM-ES2-4 and Cisco NIM-ES2-8 Overview The Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Modules are switch modules to which you can connect Cisco IP phones, Cisco wireless access point workstations, and other network devices such as video devices, routers, switches, and other network components. The following Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Modules are supported on the Cisco 4000 Series ISRs: • 4-ports non-POE Layer 2 Gigabit Ethernet Switch Network Interface Module (NIM-ES2-4) • 8-ports non-POE Layer 2 Gigabit Ethernet Switch Network Interface Module (NIM-ES2-8) • 8-ports POE Layer 2 Gigabit Ethernet Switch Network Interface Module (NIM-ES2-8-P) Multiple Cisco NIM-ES2-4 and Cisco NIM-ES2-8 units that can be present on the Cisco 4000 ISR is dictated by the total NIM slots present in the router. Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Modules support a maximum of 4K entries in the MAC table. Note The following table lists the maximum number of network modules supported on the router. Installing the Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Module 1