Cisco RSP7000 Manuals

1 Doc. No. Copyright © 1996 Cisco Systems, Inc. All rights reserved. 7000 Series Route Switch Processor (RSP7000) Installation and Configuration in the Cisco 7000 Series Routers 78-2561-01 Product Numbers: RSP7000=, MEM-RSP-FLC8M=, MEM-RSP-FLC16M=, MEM-RSP-FLC20M=, MEM-RSP-8M=, MEM-RSP-16M, MEM-RSP-24M, MEM-RSP-32M(=), MEM-RSP-64M(=), and MEM-RSP-128M(=) This document discusses the 7000 Series Route Switch Processor (RSP7000), which is a new main processor module for the Cisco 7000 series routers: the Cisco 7000 and the Cisco 7010. The RSP7000 combines all of the switched routing and high-speed switching functions required by the Cisco 7000 series routers. (Refer to the section “What Is the RSP7000?” on page 3.) The RSP7000 requires that your Cisco 7000 series router is running Cisco Internetwork Operating System (Cisco IOS) Release 10.3(9), or later, Release 11.0(6), or later, or Release 11.1(1) or later. Caution Using the RSP7000 in your Cisco 7000 series router might require that some currently installed interface processors be upgraded to specific, compatible hardware versions; otherwise, error messages and erratic system behavior might result. You can use the show diag command to see which interface processors in your system need this hardware upgrade. For a complete list of the potentially affected interface processors, their required hardware versions, and information on upgrading your affected interface processors, refer to the document Verifying Interface Processor Compatibility with the Cisco 7500 Series Investment Protection Program (IPP), Document Number 78-2077-xx, where xx refers to the latest version of this document. Document Contents Following are the sections in this document: • Product Descriptions, page 2 • Installation Prerequisites, page 7 • Installation Procedures, page 18 • Troubleshooting the Installation, page 23 • Reference Information, page 28 • Cisco Information Online, page 47

1 Doc. No. Copyright © 1996 Cisco Systems, Inc. All rights reserved. Installing the RSP7000 Upgrade Kit in the Cisco 7000 Series Routers 78-2564-01 Product Number UPG-RSP7000= This document contains instructions for installing the 7000 Series Route Switch Processor (RSP7000) upgrade kit (UPG-RSP7000=) in the Cisco 7000 series routers: Cisco 7000 and Cisco 7010. This upgrade kit allows for 7500-series performance enhancements to the Cisco 7000 series routers. The RSP7000 upgrade kit includes the following components: • The 7000 Series Route Switch Processor (RSP7000) board, which installs only in the 7000 RSP slot—slot 5 in the Cisco 7000, and slot 3 in the Cisco 7010 • The 7000 Series Chassis Interface (RSP7000CI) board, which installs only in the 7000 CI slot—slot 6 in the Cisco 7000, and slot 4 in the Cisco 7010 The RSP7000 upgrade kit requires that your Cisco 7000 series router is running Cisco Internetwork Operating System (Cisco IOS) Release 10.3(9), or later, Release 11.0(6), or later, or Release 11.1(1) or later. Caution Using the RSP7000 upgrade kit in your Cisco 7000 series router might require that some currently installed interface processors be upgraded to specific, compatible hardware versions; otherwise, error messages and erratic system behavior might result.You can use the show diag command to see which interface processors in your system need this hardware upgrade. For a complete list of the potentially affected interface processors, their required hardware versions, and information on upgrading your affected interface processors, refer to the document Verifying Interface Processor Compatibility with the Cisco 7500 Series Investment Protection Program (IPP), Document Number 78-2077-xx, where xx refers to the latest version of this document. The sections in this document include the following: • Product Overview, page 2 • Installation Prerequisites, page 6 • Installing the RSP7000 Upgrade Kit, page 16 • Checking the Installation, page 21 • Customer Information Online, page 26