Cisco SPA501G Manuals

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phones Models SPA301, SPA303, SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA512G, SPA514G, SPA525G, SPA525G2, and WIP310 ADMINISTRATION GUIDE

Cisco IP Phone Configuration Guides Version 1.0 Yeastar Information Technology Co. Ltd.

Cisco SPA 50X Quick Start guide Business

Cisco Small Business IP Phones Models SPA301, SPA303, SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA512G, SPA514G, SPA525G, SPA525G2, and WIP310 ADMINISTRATION GUIDE

Cisco Small Business IP Phones Models SPA301, 303, 501G, 502G, 504G, 508G, 509G, 525G/525G2, and WIP310 ADMINISTRATION GUIDE

0800 040 8888 Quick start guide to your IP phone IP Phone Models SPA501G, SPA502G, SPA504G, SPA508G, and SPA509G working with daisy www.daisygroupplc.com v1 - 06/13

Quick Start Guide Cisco Small Business IP Phone Models SPA501G, SPA502G, SPA504G, SPA508G, and SPA509G Package Contents • IP Telephone • Phone Stand • RJ-45 Ethernet Cable • Quick Start Guide • Documentation on CD-ROM Welcome Thank you for choosing the Cisco Small Business IP phone. This guide describes how to install your phone and how to perform some basic tasks. The features available on your phone depend on the type of system to which your phone is connected. Your phone system might not provide all of the features mentioned in this document. Contact your phone system administrator for questions about phone features. Installing Your IP Phone Use these procedures to install the phone and connect it to your network. 1 STEP 1 Turn the phone body over to expose the ports on the back of the unit. CAUTION Do not insert a telephone line cord into the auxiliary port. STEP 2 Insert the long end of the phone cord into the handset port on the phone body that is marked with a phone symbol. STEP 3 (Optional) Route the phone cord through the cable slot. STEP 4 Insert the other end of the phone cord into the port at the bottom of the handset (not shown). STEP 5 (Optional) Connect the phone stand by lining up the tabs on the stand with the slots on the phone body. Slide the bottom tabs into the lower slots on the phone body and lightly press down on the stand. It should easily slide into the upper stand slots. Do not force. STEP 6 If you are using an external power source, insert one end of the power cord into an outlet and insert the other end of the power cord into the power port on the phone body. STEP 7 Connect your phone to the network: • Using an Ethernet Connection—Insert one end of the Ethernet cable into the network port on the phone body marked “SW.” Insert the other end of the Ethernet cable into the appropriate device, such as a network switch, on your network. • Using a Wireless Connection—You can use a Cisco WBP54G Wireless-G Bridge with the IP phone to create a wireless connection between the phone and the network. See the WBP54G documentation on Cisco.com for more information. The Where to Go From Here section contains links to the documentation area on Cisco.com STEP 8 (Optional) To provide network access to a PC, connect one end of an additional Ethernet cable (not provided) to the PC port on the back of the phone body. Connect the other end of the Ethernet cable to the network port on your PC. STEP 9 (Optional) To install the phone on a vertical surface, use the Cisco MB100 Wall Mount bracket. See the Cisco Small Business IP Phone SPA50X User Guide (SIP) or the Cisco Unified Communications Manager Express for the Cisco Small Business IP Phone SPA50X documents on Cisco.com for more information. The Where to Go From Here section contains links to the documentation area on Cisco.com. Phone Lines and Buttons The photo above shows the Cisco SPA509G. Other models differ. Numbered objects in the photo are explained in the following table. # Phone Feature Description 1 Handset Pick up to place or answer a call. 2 Message Waiting Indicator Displays solid red when you have a new voice mail message. Flashes red during an incoming call or when the phone’s firmware is being updated. (Behavior may differ depending on phone system.) 3 LCD Screen Displays date and time, phone station name, line extensions, and softkey options. (Not available on the Cisco SPA501G.) 2 4 Line keys Indicates phone line status. (Not available o Cisco SPA502G.) These keys can also be programmed by your phone system admin to perform functions such as speed dial, ca pickup, or monitoring an extension. Line colors depend on the type of phone sy to which your phone is connected. (SIP or S See the User Guide for your phone for mor information. The Where to Go From Here s contains links to the documentation area on Cisco.com. 5 Softkey buttons Press a softkey button to perform the actio shown on the label on the LCD screen abov Note: The Cisco SPA501G has the following buttons: Redial—Dials the last number called Cancel—Cancels an action (such as transfer). Conference—While on a call, press a conference call and dial another n After the second party answers, pre Conference again to create the conference Transfer—While on a call, press to tr then dial the number to which to tra Press Transfer again to transfer the 6 Navigation button Press an arrow to scroll left, right, up, or do through items shown on the LCD screen. (N available on the Cisco SPA501G.) 7 Messages button Press to access voice mail (must be set up your phone system administrator). 8 Hold button Press to place a call on hold. # Phone Feature Description

Cisco Small Business Cisco SPA50X and SPA51X SIP IP Phones Models SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA512G, and SPA514G USER GUIDE

Cisco Small Business Cisco SPA50X and SPA51X SIP IP Phones Models SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA512G, and SPA514G USER GUIDE

Cisco Small Business SPA50X and SPA51X Series SPCP IP Phones Models SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA512G, and SPA514G USER GUIDE