Citizen PPU-700 Manuals

Revision: 1.03 2006/10/26 PRINTER PRESENTER UNIT Command Reference Model: PPU-700

LINE THERMAL PRINTER MODEL PPU-700/PPU-700II Quick Start Guide ZG74904-10F 1.10E-1612 Printed in Japan GENERAL PRECAUTIONS 1. The information contained in this manual is subject to change without prior notice. 2. Reproduction or transfer of part or all of this manual in any means is prohibited without permission from CITIZEN SYSTEMS. 3. Except explained elsewhere in this manual, do not attempt to service, disassemble, or repair this product. 4. Note that CITIZEN SYSTEMS is not responsible for any damage attributable to incorrect operation/handling or improper operating environments that are not specified in this manual. 5. Operate this printer only as described in this manual. Failure to do so may cause accidents or other problems. 6. Data are basically for temporary use and not for storage for a long period or permanently. Please note that CITIZEN SYSTEMS is not responsible for damage or lost profit resulting from the loss of data caused by accidents, repairs, tests or other occurrence. 7. If you find loss of information, error, or uncertain matter, please contact your CITIZEN SYSTEMS dealer. 8. Please note CITIZEN SYSTEMS is not responsible for anything that may occur from operating this printer regardless of what is stated in “7” above. PRECAUTIONS ON PRINTER INSTALLATION WARNING PRECAUTIONS IN HANDLING THE PRINTER WARNING This printer conforms to the following Standards: The Low Voltage Directive 2006/95/EC, formerly 72/23/EEC, the EMC Directive 2004/108/EC, formerly 89/336/EEC, the RoHS Directive 2002/95/EC, and the WEEE Directive 2002/96/EC. LVD : EN60950 EMC : EN55022 Class A EN61000-3-2 EN61000-3-3 EN55024 This declaration is applied only for 230V model. Declaration of Conformity IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. CAUTION: Use shielded cable for this equipment. Sicherheitshinweis Die Steckdose zum Anschluß dieses Druckers muß nahe dem Gerät angebracht und leicht zugänglich sein. For Uses in Canada This digital apparatus does not exceed the class A limits for radio noise emissions from digital apparatus, as set out in the radio interference regulations of the Canadian department of communications. Pour L’utilisateurs Canadiens Cet appareil numérique ne dépasse pas les limites de carégorie a pour les émissions de bruit radio émanant d’appareils numériques, tel que prévu dans les réglements sur l’interférence radio du départment Canadien des communications. Do not use or store this product in a place where it will be exposed to: ●Flames or moist air ●Direct sunlight ●Hot airflow or radiation from a heating device ●Salty air or corrosive gases ●Ill-ventilated atmosphere ●Chemical reactions in a laboratory ●Airborne oil, steel particles, or dust ●Static electricity or strong magnetic field • Neglecting these warnings may result in printer failure, overheating, emission of smoke, fire, or electric shock. Do not drop any foreign object nor spill liquid into the printer. Do not place any object on the printer either. ●Do not drop any metallic object such as paper clip, pin or screw into the printer. ●Do not place a flower vase, pot or cup containing water on the printer. ●Do not spill coffee, soft drinks or any other liquid into the printer. ●Do not spray insecticide or any other chemical liquid over the printer. ●Never use organic cleaning solvent such as alcohol, paint thinner, trichloroethylene, benzene, or ketone. • A metallic foreign object, if accidentally dropped into the printer, may cause printer failure, fire, or electric shock. Should it occur, immediately turn the printer off, unplug it from the supply outlet, and call your local CITIZEN SYSTEMS dealer. Do not handle the printer in the following ways: ●Do not allow the printer to sustain strong impacts or hard jolts (e.g., trampling, dropping, striking with a hard edge). ●Never attempt to disassemble or modify the printer. • Neglecting to handle properly may result in printer failure, overheating, emission of smoke, fire, or electric shock. Install, use, or store the printer out of the reach of children. • Electric appliances could cause an unexpected injury or accident if they are handled or used improperly. • Keep the power cord and signal cables out of the reach of children. Also children should not be allowed to gain access to any internal part of the printer. • The plastic bag the printer came in must be disposed of properly or kept away from children. Wearing it over the head may lead to suffocation. Please observe the following precautions for power source and power cord: ●Do not plug or unplug the power cord with a wet hand. ●Use the printer only at the specified supply voltage and frequency. ●Use only the specified AC adapter with the printer. ●Check to make sure that the supply outlet from which the printer is powered has a sufficient capacity. ●Do not supply the printer from a power strip or current tap shared with other appliances. ●Do not plug the power cord into a supply outlet with dust or debris left on its plug. ●Do not use a deformed or damaged power cord. • Neglecting to handle properly may result in printer failure, emission of smoke, fire, or electric shock. • An overload may cause the power cord to overheat or fire or the circuit breaker to trip. ●Do not use the printer while the power cord is loaded with anything or it is trampled on. ●Do not use or carry the printer with its power cord bent, twisted, or pulled. ●Do not attempt to modify the power cord unnecessarily. ●Do not lay the power cord in the neighbor of a heating device. • Neglecting these cautions may cause wires or insulation to break, which could result in leakage, electric shock, or printer failure. If a power cord sustains damage contact your CITIZEN SYSTEMS dealer. ●Do not leave things around the supply outlet. ●Supply power to the printer form a convenient wall outlet, readily accessible in an emergency. • The printer may not be immediately shut down in an emergency. ●Insert the power plug fully into the supply outlet. ●If the printer is likely to be out of use for a long time, leave it disconnected from its supply outlet. EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation. QR Code is registered trademark of DENSO WAVE INCORPORATED. CITIZEN is a registered trademark of Citizen Watch Co., Ltd. Japan. Company names and product names in this manual are trademarks or registered trademarks of relevant companies. Copyright c 2016 by CITIZEN SYSTEMS JAPAN CO., LTD.

Service Manual PRINTER PRESENTER UNIT MODEL PPU-700 Rev. 1.00T Newly issued on Jan.15 2007

Service Manual PRINTER PRESENTER UNIT MODEL PPU-700 Rev. 1.02 issued on July 13, 2006

PRINTER PRESENTER UNIT MODEL PPU-700/700II User’s Manual

PRINTER PRESENTER UNIT MODEL PPU-700 User’s Manual