Clarke CMPW1 Manuals

1 pdf manual(s) Clarke CMPW1 for free download (Document Types: Assembly instructions manual)

Clarke CMPW1 Assembly instructions manual [PDF] (8 pages)

  • Identifier: id-1863466
  • Brand: Clarke
  • Device: CMPW1 Tool Storage
  • Type: PDF
  • Key Aspects: Hardware Verification Checklists, Common Issue Diagnostic Flows, Model Variations and Compatibility
  • UPD Date: 01.09.2026
  • Source File: 1859296.pdf
  • Pages: 8
  • Description: Product usage manual for the Clarke CMPW1.
Pages Preview:
  • 2 INTRODUCTION Thank you for purchasing this CLARKE Multi Function Workbench Before using the workbench, please read this instruction manual thoroughly and carefully follow all directions given. This is for your own safety and for that of others around you, and will also help you achieve long and trouble free service from your workbench. GUARANTEE • This product is guaranteed against faulty manufacture for a period of 12 months. Please keep your receip
  • 3 PARTS LIST NO DESCRIP IT ON QTY PART NUMBER NO DESCRIP IT ON QTY PART UMBER N 1 Ro ll er Head 1 YHMPW01 10 7mm Washer 8 HMPW10 Y 2 Cross Member 2 YHMPW02 11 10mm Nut 8 HMPW11 Y 3 rT es lt e 1 YHMPW03 12 Handles 2 HMPW12 Y 4 Height Adjustment Ba sr 2 YHMPW04 13 Secu ir ng pin 2 HMPW13 Y 5 Legs 2 YHMPW05 14 Rubber Foot 4 HMPW14 Y 6 M8 Bo tl 40mm 8 YHMPW06 15 M8 Washer 2 HMPW15 Y 7 8mm Washer 16 YHMPW07 16 M8 Bo tl 1 HMPW16 Y 8 13mm Nut 8 YHMPW08 17 M8 x 16
  • 4 ASSEMBLY 2. Fit the second cross member (2) to the rear of the legs as shown. 4. Connect the two height adjustment bars (4) to the roller head (1) and fix in place using 4 bolts (6) 8 washers (7) and 4 nuts (8) supplied. 1. Open both sets of legs (5) and fix the cross-member (2) into position using 4 screws (9) 4 washers (10) and 4 nuts (11) supplied. 3. Place a rubber foot (14) onto the end of each leg.
  • 5 ASSEMBLY 5. Pull the roller release pin and rotate the roller head until it is in the position shown. 6. Fit the trestle (3) onto the roller head and secure using 4 bolts (6) 8 washers (7) and 4 nuts (8) supplied. 7. Slide the roller assembly into the legs.
Document Preview & Text Transcription (Main Page)
Click to expand and read text
MULTI FUNCTION WORKBENCH MODEL No: CMPW1 Part No: 6500124 ASSEMBLY INSTRUCTIONS LS1009

Clarke CMPW1: Tool Storage Category Related Instructions

Ology
Steelcase Ology
12.05.2026 4 pages

Ology™ Boundary Screen 888.STEELCASE (888.783.3522) www.steelcase.com © 2019 Steelcase Inc. Grand Rapids, MI 49501 U.S.A. ® Page 1 of 4 1360035001 Rev A T30 #2 SQUARE 5/32” Device setup guide for the Steelcase Ology Indoor Furnishing. This guide offers guidance on internal layout, setup, service instructions, user settings.

LS1013
Makita LS1013
12.07.2026 6 pages

Parts Breakdown LS1013 Page 1 of 6 2/8/2008 Complete technical documentation for the Makita LS1013 Saw. The guide offers support information and power requirements, user instructions, control functions.

CAPRI 2000
Target CAPRI 2000
03.09.2026 2 pages

COMPONENTS / HARDWARE 2 ALLOW 30 MINUTES FOR ASSEMBLY 2 PEOPLE REQUIRED FOR ASSEMBLY IMPORTANT: On initial assembly, DO NOT tighten bolts completely until all parts are joined. Once all parts are joined, flip table over, ensure all legs are even. Once even, Complete technical documentation for the Target CAPRI 2000 Tool Storage. The document offers guidance on performance optimization, application scenarios, device features, adjustment procedures.

MSW-WWB 100
MSW MSW-WWB 100
31.07.2026 7 pages

User manual | Manuel d´utilisation | Istruzioni per l‘uso | Manual de instrucciones | Instrukcja obsługi | Návod k použití BEDIENUNGSANLEITUNG E X P O N D O . D E WORK BENCH MSW-WWB 100 Instruction guidebook for the MSW MSW-WWB 100 Tool Storage. The manual outlines technical specifications and user preferences, usage tips, device instructions, device calibration.