Clarke ETC7 Manuals

1 pdf manual(s) Clarke ETC7 for free download (Document Types: Operating & maintenance instructions)

Clarke ETC7 Operating & maintenance instructions [PDF] (4 pages)

  • Identifier: id-71319
  • Brand: Clarke
  • Device: ETC7 Cutter
  • Type: PDF
  • Key Aspects: Documentation and Revision History, System Architecture and Design Overview, Device Specifications Overview
  • UPD Date: 17.06.2026
  • Source File: 104945.pdf
  • Pages: 4
  • Description: Quick start guide for the Clarke ETC7.
Pages Preview:
  • Thank you for purchasing this Clarke Tile Cutting Machine. The ETC7 tile cutter incorporates a 180mm sintered diamond cutting disk and will make straight cuts on tiles with a maximum cutting depth of 34mm. The table may be tilted so that tiles may be cut to any angle up to 45 degrees. The maximum cutting depth at 45 degrees is 15mm. Please read this manual thoroughly before use. This will ensure the safety of both yourself and those around you, and will al
  • Common sense applies to the use of both this and any other electric power tool. In particular we bring the following points to your attention. ALWAYS keep the work area clean, well lit and uncluttered. ALWAYS place the machine on a firm steady base and at a comfortable working height. Apart from the water trough which is provided to wet the cutting disk, ALWAYS check to ensure that all other parts of the machine and the surrounding work area are kept dry.
  • WARNING! If the power cable is worn or cut, or damaged in any way, have it replaced immediately to avoid shock or fire hazard. Connect the mains lead to a 230 volt (50Hz) domestic electrical supply via a standard 13 amp BS 1363 plug fitted with a 13 amp fuse, or a suitably fused isolator switch. WARNING! THIS APPLIANCE MUST BE EARTHED. IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Green & Yellow - Earth Blue -
Document Preview & Text Transcription (Main Page)
Click to expand and read text
ELECTRIC TILE CUTTER Model No. ETC7 & ETC7SS Part Nos. 3400505 & 3400510 OPERATING & MAINTENANCE INSTRUCTIONS 0805 ELECTRIC TILE CUTTER

ETC7: Related Instructions

AC12000
Clarke AC12000
09.07.2026 20 pages

OPERATION & MAINTENANCE INSTRUCTIONS GC12/13 PORTABLE AIR CONDITIONER MODEL NO: AC12000 PART NO: 3230572 Step-by-step user manual for the Clarke AC12000 Air Conditioner. The manual details error codes, installation procedures, setup guidelines, hardware setup.

08992B
Clarke 08992B
19.04.2026 73 pages

Technical guide for the Clarke 08992B Floor Machine. It covers topics such as operating instructions, technical assistance, product safety, service instructions.

STRON-ARM CSTA100
Clarke STRON-ARM CSTA100
30.05.2026 2 pages

Thank you for purchasing this CLARKE Aluminium SackTruck. Please read this leaflet thoroughly and follow the instructions carefully, in doing so you will ensure Operation guide for the Clarke STRON-ARM CSTA100 Trucks. The guide explains setup and error codes, device features, service procedures, control functions.

IVP13A
Clarke IVP13A
01.06.2026 9 pages

1103 Operating handbook for the Clarke IVP13A Water Pump. This guide offers guidance on connectivity options, technical guidelines, installation, daily usage.

1501ND
Clarke 1501ND
16.05.2026 2 pages

Schematic Wiring Diagram TECHNICAL INFORMATION 0702 MODEL Nos: 1501ND • 2000ND • 2503ND • 2503LRND Comprehensive setup guide for the Clarke 1501ND Portable Generator. It explains installation, setup, and wiring setup, performance optimization, technical assistance.

CON15
Clarke CON15
04.07.2026 20 pages

OPERATING & MAINTENANCE INSTRUCTIONS GC0309 15 DEGREE COIL NAILER Model CON15 Part No: 3110295 Device operation guide for the Clarke CON15 Nail Gun. The manual outlines technical specifications and setup instructions, application scenarios, product specifications.

Similar Manuals in the Cutter Category

PBCC65
Stanley PBCC65
09.07.2026 16 pages

© 2017 STANLEY Black & Decker, Inc. New Britain, CT 06053 U.S.A. 81144 1/2018 Ver. 1 USER MANUAL Safety, Operation and Maintenance PBCC65 CUTTING TOOL Maintenance and service manual for the Stanley PBCC65 Cutting tool. This guide provides information on maintenance guidelines, shutdown procedures, component replacement.

AMK-21A
Amkus AMK-21A
23.07.2026 4 pages

©Copyright Amkus Rescue Systems, Inc. 2016 LAC-002 July 1, 2015 Rev04 AMK-21A CUTTER User Information Manual AMKUS RESCUE SYSTEMS www.amkus.com 4201 Montdale User guidebook for the Amkus AMK-21A Cutter. This manual provides guidance on hardware instructions, usage procedures, usage recommendations.

BT-MC 355
EINHELL BT-MC 355
04.08.2026 24 pages

m Manual de instrucciones original Tronzadora de Metal t Original operating instructions Metal Cutting-Off Machine Art.-Nr.: 45.031.31 I.-Nr.: 11012 BT-MC 355 � Professional operation guide for the EINHELL BT-MC 355 Cutter. This guide offers instructions on performance optimization, technical assistance, system checks, assembly reference.

C 2067
Carat C 2067
26.08.2026 72 pages

Gebruiksaanwijzing Tegelsnijmachine Mode d’emploi Machine à découper les carreaux Operating Instructions Tile cutting machine Bedienungsanleitung Fliesensch Official operating instructions for the Carat C 2067 Cutter. It explains maintenance and maintenance guidelines, troubleshooting tips, user settings.