Clarke Strong-Arm CTJ 50 Manuals

AH0509 OPERATING & MAINTENANCE INSTRUCTIONS 1/2 TON TRANSMISSION JACK Model: CTJ 50 SPECIFICATIONS CTJ50 Min Height (mm) 1140 Max. Height (mm) 1940 Max. Load (kg) 500 Weight (kg) 62 Part Number 7610025 Thank you for purchasing this CLARKE Strongarm Transmission Jack, designed for use in the removal and installation of transmissions and differentials. Before attempting to use the jack, please read this leaflet thoroughly and follow the instructions carefully, in doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the crane giving you long and satisfactory service. GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. SAFETY PRECAUTIONS 1. DO NOT exceed the load capacity . IMPORTANT: If the load capacity decal becomes worn or illegible, contact Clarke International Spares Division, on 020 8988 7400 for replacement. 2. Ensure that the equipment is assembled correctly and that all the bolts and pins are in place and secure. 3. Only use the transmission jack on a solid, flat, level surface. 5. Lower the load as much as possible before moving the jack. Do not ransport loads in an elevated position. 6. Do not stand under the load. 7. Use appropriate safety equipment, such as protective footwear, when using this jack. 8. Ensure the operator is skilled and trained in both operation and safety aspects. 9. Always inspect the jack before use to ensure it is in good condition, and replace any damaged or worn parts. 10. When replacing parts, use only those supplied by Clarke International. Refer to Parts List. 11. Ensure that the jack is properly maintained, and lubricated at all times, and that no rust or other forms of corrosion is allowed to weaken any part of it. 12. If the jack has been subjected to an abnormal load or shock, it should be removed from service immediately and fully inspected by qualified personnel, and passed as serviceable, before being used again 3