Clarke STRONG-ARM CTJ5GLB Manuals

OPERATION & MAINTENANCE INSTRUCTIONS LS0609 5 TONNE HEAVY DUTY LONG CHASSIS TROLLEY JACK MODEL NO: CTJ5GLB PART NO: 7623055 2 INTRODUCTION Thank you for purchasing this CLARKE 5 Tonne Heavy Duty Long Chassis Trolley Jack. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. 3 SPECIFICATIONS Model number CTJ5GLB Part number 7623055 Length (not including handle): 1338 mm Width 428 mm Height 185 mm Height of lifting cup (minimum) 165 mm Height of lifting cup (maximum) 565 mm Weight 85.5 kg Rated Load 5 tonne SAFETY PRECAUTIONS 1. This jack is for lifting only, do not move a load using the jack as a dolly. 2. Always inspect the jack before use. Make sure that all parts are in good condition and operating smoothly, and that no cracks or distortion is apparent. If in doubt do not use. Have the parts replaced or consult your CLARKE dealer. 3. Make sure that the jack is on a firm solid base, and there is no possibility of it slipping when under load. 4. Make sure the load is taken by the full saddle and that the point of lift on the load, is of sufficient strength to support the full load adequately. 5. Always use axle stands to stabilise the load once lifted. NEVER work on or under a load unless it is fully and adequately supported. NEVER rely upon the jack to hold the load in position. 6. Never push a load off the jack. 7. Ensure that all personnel are well clear of a load being raised, or lowered. 8. NEVER exceed the rated load for the jack (See “Specifications” on page 3.). 9. Do not use if an oil leak is apparent. Consult your Clarke dealer. 10. Consult the vehicle handbook to determine the correct lifting points. 4 PARTS IDENTIFICATION RELEASE KNOB SADDLE COVER FOOT PEDAL CASTORS FRONT WHEELS HANDLE LOCK