Clear-Com BP410 Manuals

Quick Reference Guide BP410 1. Battery 2. Increase Volume button (▲) 3. Decrease Volume button (▼) 4. PWR (Power) button 5. Headset cable connector 6. Battery-release latch 7. Power/Mode lights 8. Channel A (Intercom 1) button - Includes 2-wire and 4-wire connections 9. ISO (Isolate) button - To All Wireless Headsets and Beltpacks, Base, ISO Relay and AUX OUT (if activated) 10. Channel B (Intercom 2) button - Includes 2-wire and 4-wire connections The Beltpack Beltpack Setup 7 7 8 9 10 2 1 6 4 3 5 Part Number: 399G214 Rev A Date: 12/5/16 Copyright © 2016 Clear-Com, LLC, an HM Electronics, Inc. company. All rights reserved. Clear-Com, the Clear-Com logo and Clear-Com Concert are trademarks or registered trademarks of HM Electronics, Inc. Battery RELEASE BATTERY button Belt clip Headset cable plug ¾ Insert a fully charged battery in each Beltpack with the metal contacts inserted first. Slide it in until it snaps. NOTE: The battery will not slide in if inserted incorrectly. Excessive force should not be necessary. ¾ Plug the Beltpack’s headset cable connector into each Beltpack. BP410 Beltpack Settings To Set: All functions are from an off state. Press the Power button and release with the appropriate buttons below. ISO restrict On A button ISO restrict Off A button and ISO buttons Handsfree On selected button(s) A button and/or B button and/or ISO and Volume up button (▲) Handsfree Off selected button(s) A button and/or B button and/or ISO and Volume down button (▼) Listen-Only mode On Volume down button (▼) Listen-Only mode Off Volume up button (▲) To Set: With the power already on... Increase mic gain (15 steps) Press the B button while repeatedly pressing the Volume up button (▲) Decrease mic gain (15 steps) Press the B button while repeatedly pressing the Volume down button (▼) Increase sidetone level (5 steps) Press the A button while repeatedly pressing the Volume up button (▲) Decrease sidetone level (5 steps) Press the A button while repeatedly pressing the Volume down button (▼)