Cleveland SD-1050-K 6 6 Manuals

SE95008 Rev. 6 Operators Manual Installation, Operation & Service Direct Steam Table Top Kettles Table-Top Direct Steam Kettles MODELS: KDT- 1-T KDT- 3-T KDT- 6-T KDT-12-T KDT-20-T SD Stands MODELS: SD- 450 SD- 650 SD- 760 SD-1050 SD-1200 SD-1600 SD-1800 Kettles on SD Stands MODELS: SD-450- K 6 SD-650- K12 SD-760- K12 SD-760- K20 SD-1050-K 6 6 SD-1200-K 612 SD-1600-K 620 SD-1600-K1212 SD-1600-K1220 SD-1600-K2020 1333 East 179th St., Cleveland, Ohio, U.S.A. 44110 Phone: (216) 481-4900 Fax: (216) 481-3782 Visit our web site at www.clevelandrange.com Cleveland ™ Enodis

Cleveland ™ Project ________________________________ Item __________________________________ Quantity _______________________________ FCSI Section ____________________________ Approval _______________________________ Date __________________________________ 1333 East 179 St., Cleveland, Ohio, U.S.A. 44110 Tel: 1-216-481-4900 Fax: 1-216-481-3782 Web Site: www.ClevelandRange.com Email: [email protected] DIRECT STEAM KETTLES Cleveland Standard Features I Type 304 Stainlesss Steel construction, with #4 finish on Kettle I Factory Assembled Kettle/Stand combinations with available kettle capacities to suit most needs I Steam Control Kit: includes: Needle Type Steam Control Valve, Steam Trap, Condensate Strainer, Check Valve, Nipples and Fittings, factory assembled and mounted on kettles(s) I Kettles are Mounted on Stainless Steel Stand of Modular Cabinetized Design I Hot and Cold Water Faucet with Swing Spout I Table Top has Full Width Drain Trough equipped with standing 1.50" diameter male Drain Connection I Sliding drain Catch Pan with Splash Shield, easy to position for use I Kettles are 2/3 Steam Jacketed and include Lift-Off Covers I 50 psi Steam Jacket Rating I 50 psi Chrome Plated Saftey Valve I Manual Tilting, Balanced Design I Typical approvals include NSF and ASME Options & Accessories Ë Type 316 Stainless Steel Kettle Interior for high acid food products (316) Ë Cooking Basket (BS) Ë Food Strainer (FS) Ë Steam Pressure Reducing Valve, where supply exceeds 45 psi (PRV) Ë Steam Supply Moisture Separator/Trap (MS) Ë Single Pantry Faucet (SPK) Ë Wall Meter, wall mount (GM For MLMF) Ë Water Cooling, wall mount Ë Back Wall or Back Splash (BW-32 or BS-4) Ë Self Locking Hand Tilt Mechanism (HTK - 12 gallons only) Shall be CLEVELAND, Kettle(s) with Stand, Model SD - _____ - K _____ , full width Drain Trough with1 1/2" male Drain Connection, Sliding Catch Pan and 2/3 Steam Jacketed Kettle(s) _____ ea. _____ Gallon (and _____ ea. _____ Gallon) Steam Jacket Ratings to be 50 psi; Kettle and Legs to be Type 304 Stainless Steel. To operate, connect directly to a steam source supplying from 5 to 45 psi steam. Steam Condensate Trap and Strainer, Factory Assembled and Installed; includes: Hot and Cold Water Faucet with Swing Spout and Lift-Off Kettle Covers. Short Form Specifications MODELS: c SD-450-K6 c SD-1200-K612 c SD-650-K12 c SD-1600-K1212 c SD-1050-K20 c SD-1800-K2020 c SD-1050-K66 STAND MOUNTED, DIRECT STEAM 6, 12 or 20 GAL. TILTING, 2/3 STEAM JACKETED (1 or 2 EACH) 18" HIGH STAND with DRAIN 450, 650, 1050,1200 or 1600mm WIDTHS SECT. X PAGE 7 0707