CNET CNSH-2400 Manuals

TOTAL NETWORK SOLUTIONS CNSH-2400 - Twenty-Four (24)-Port 100BASE-TX Fast Ethernet Switch CNSH-2401 - Twenty-Three (23)-Port 100BASE-TX + One Fiber Port CNSH-2402 - TWENTY-TWO (22)-PORT 100BASE-TX + TWO FIBER PORTS www.cnetusa.com CNSH-2400 / CNSH-2401 / CNSH-2402 August 2002 Specifications are subject to change without notice Trademarks & Trade Names belong to their owners The CNSH-2400, 2401 and 2402 are the latest series of multi speed, smart network switches with both standard and fiber ports under the same hood. In addition to default settings, system administrators can now use the smart function on these switches to further manage their local area networks (LAN). A wide assortment of LEDs are provided on the front panel of each model for real time viewing of Switch and network operations. KEY FEATURES •= Support QoS function based on IEEE 802.1p/802.1q port priority, VLAN tag priority and TCP/IP header’s TOS/DS. •= Supports VLAN, up to 24 group VLANs. •= Provide console port and software for easy configuration. •= Store-and-Forward technology filtering/forwarding is used to eliminate bad packets. •= Back-Pressure Flow-Control support for Half-Duplex operation. •= IEEE802.3x Flow-Control support for Full-Duplex operation. •= All connectors and LEDs on front panel for easy access and real time viewing of Switch status. •= All TP ports support Auto-MDI/MDIX, and Auto- Negotiation function. PRODUCT SPECIFICATIONS Models CNSH-2400 CNSH-2401 CNSH-2402 Standards
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-TX
IEEE 802.3x: Flow-Control for Full-Duplex operation
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-TX/100BASE-FX
IEEE 802.3x: Flow-Control for Full-Duplex operation Ports
Twenty-Four (24) 100BASE-TX (Copper)
Twenty-Three (23) 100BASE- TX (Copper)
One (1) 100BASE-FX (Fiber)
Twenty-Two (22) 100BASE- TX (Copper)
Two (2) 100BASE-FX (Fiber) Media Support
10BASE-T: Category 3, 4 or 5 TP
100BASE-TX: Category 5 TP
10BASE-T: Category 3, 4 or 5 TP
100BASE-TX: Category 5 TP
100BASE-FX: 62.5/125 µm Multi-Mode fiber cable Bandwidth
100BASE-TX: 200/100Mbps
10BASE-T: 20/10Mbps
100BASE-TX: 200/100/20/10Mbps
100BASE-FX: 200/100Mbps
10BASE-T: 20/10Mbps Forwarding/Filtering Rate
148810 packets/second per port @ 100Mbps, maximum
14881 packets/second per port @ 10Mbps, maximum Latency
8 µsec @100Mbps, minimum
75 µsec @ 10Mbps, minimum MAC Addresses
8K Six (6)-bytes entries maximum, Self-Learning Buffer Memory
2.5Mb Duplex Modes
TP ports have 100/10Mbps Full/Half-Duplex Auto-Negotiation function
TP ports have 100/10Mbps Full/Half-Duplex Auto-Negotiation
Fiber ports set to Half or Forced Full-Duplex mode via console port Crossover
All the TP ports support Auto-MDIX function LED Indicators
One (1) for Power
One (1) per port for Link/ACT
One (1) per port for Full-Duplex/Collision Power Supply
Full range Auto-Switching
Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz Power Consumption
16.5 watt maximum Environment
Operating Temperature: 0° ~ 45°C (32° ~ 113°F)
Storage Temperature: -20° ~ 70°C (-4° ~ 158°F)
Humidity: 10% ~ 90% Non-Condensing Certifications
FCC Class A
CE Mark Dimensions
442x184x44mm(17.40x7.24x1.73inches) ORDERING INFORMATION Models Description CNSH-2400(G) Twenty-Four (24)-Port 100BASE-TX Fast Ethernet Switch CNSH-2401(G) Twenty-Three (23)-Port 100BASE-TX plus One (1)-Port 100BASE-FX Fast Ethernet Switch (SC type connector) CNSH-2402(G) Twenty-Two (22)-Port 100BASE-TX plus Two (2)-Port 100BASE-FX Fast Ethernet Switch (SC type connector)