Comeup GTD-650 Manuals

2 Heavy Duty Hoist Limited One (1) Year Warranty WARRANTY Comeup Industries Inc. (COMEUP) warrants to the original purchaser that COMEUP heavy duty hoist will be free of defects in material and workmanship for a period of one (1) year from the original date of purchase. All COMEUP mounting kits and other accessories carry a one (1) year limited warranty against defects in material workmanship. This warranty applies only to the original purchaser of the hoist. To obtain any warranty service, the purchaser under this Limited Warranty is requested to advise COMEUP or its authorized distributors on any claim. The purchaser must provide a copy of the purchase receipt bearing the hoist serial number, date of purchase, owners name, email or Tel & Fax, address and purchaser vehicle details. Any products that COMEUP determines to be accountable for defective will be repaired or replaced or refund at COMEUP sole discretion without charge to buyer upon buyer’s compliance with these procedures. In the event of repair or replace, purchaser must send the defective hoist or part, with freight prepaid, to COMEUP or its authorized distributor. And COMEUP will send the serviced product back to purchaser on COMEUP’s cost. This warranty does not cover the removal or reinstallation of the hoist. COMEUP takes the responsibility for COMEUP hoist parts and components to be free from defects in materials and workmanship, but the following portions are hereby excluded and disclaimed. COMEUP or its authorized distributors may make reasonable charges for parts and labour for repairs or resumption in the following portions not covered by this limited warranty. (1). All warranties of wire rope assembly after initial use (2). All warranties of fitness for a particular purpose (3). All warranties of the product’s finish (4). All warranties of merchantability The limited warranty does not cover any failure that results from improper installation/operation, third party part substitution, purchaser’s alteration or modification on COMEUP hoist. This warranty is void when COMEUP serial number plate is removed or defaced. COMEUP’s liability to the purchaser under the hoist purchases for any loss or damage howsoever and whatsoever arising shall not exceed the price of the initial hoist purchase receipt. COMEUP shall not in any event be liable to the purchaser for any consequential and/or indirect loss or damage whether for loss or for profit or otherwise, costs, expenses or other claims for consequential compensation whatsoever and whether caused by negligence of COMEUP employees, distributors and their employees or otherwise. COMEUP reserves the right to change product design without notice. In situations in which COMEUP has changed a product design, COMEUP shall have no obligation to upgrade or otherwise modify previously manufactured products.

Heavy Duty Hoist Model: GTD-650 PN: 750265 12V 750280 24V Introduction � Feature Line lifting: 295 kg / 650 lb wire rope first layer Wire rope: 3.6 mm × 18.3m galvanized aircraft A7 × 19 Brake: Mechanical spring applied and permanent motor dynamic brakes together Control: Handheld pendant switch powers the hoist � Unpacking ． ． ． ．Hoist assembly…………………………………………………………… 1 pc ． ． ． ．Control box………………………………………................................... 1 pc ． ． ． ．Remote control…………………………………………………………… 1 pc ． ． ． ．Wire rope with hook……………………………………………………… 1 pc � Read this manual carefully Carefully read and understand this manual before operating the winch. Careless winch operation may result in personal injury, danger to others and or damage to property � Information requesting or parts ordering Please specify the following information: ． ． ． ．Hoist PN ． ． ． ．Part description ． ． ． ．Serial number ． ． ． ．Replacement part number ． ． ． ．Quantity for each part