CommScope RUCKUS SmartZone 300 Manuals

RUCKUS SmartZone 300 Quick Setup Guide This Quick Setup Guide provides basic instructions for setting up the SmartZone 300 (SZ300) on the network, which must be installed by a trained personnel. For information on advanced configuration and management options, see the Getting Started Guide and other appropriate documents, which are available for download from the Support website: https://support.ruckuswireless.com/documents This Guide in Other Languages 请从以下网站获得该指南的简体中文版 https:// support.ruckuswireless.com. Vous trouverez la version française de ce guide à l'adresse suivante https://support.ruckuswireless.com. このガイドの日本語版は https://support.ruckuswireless.com でご覧ください。 이 가이드의 한국어 버전은 웹 사이트 (https:// support.ruckuswireless.com) 에서 확인하시기 바랍니다. Veja a versão em português (Brasil) deste guia em https:// support.ruckuswireless.com. Puede ver la versión en español (América Latina) de esta guía en https://support.ruckuswireless.com. Licensing Information The SmartZone 300 (SZ300) comes pre-shipped with 10,000 temporary AP Capacity Licenses, which are valid for a period of 90 days from when the SZ300 is configured via the initial setup configuration. For operation beyond 90 days, you MUST buy permanent AP Capacity licenses. The purchased Licenses MUST be activated for them to become valid. The management of the AP Capacity Licenses and the ability to activate the permanent License will be through the Support Portal (https://support.ruckuswireless.com). An email will be sent to the User that is identified on the Purchase Order and full instructions as to how to activate the Licenses is included in the email. As a guide, full instructions can be found at https:// support.ruckuswireless.com/activate. Using the LiMAN (license management) portal on the Support website, you can assign licenses to or from a SZ300 or move them to another SZ300 (see a summary of LiMAN features in the table below). To physically manage the distribution of licenses from the Support website to the actual SZ300, connect the SZ300 directly to the Internet. NOTE: In the event that the SZ300 is not connected to the Internet, you can download the actual licenses from the Support Portal and manually upload to the specific SZ300. For step-by-step instructions on how to activate the SZ300’s licenses, see Step 5: Activate the SZ300’s Licenses on page 3. TABLE 1 LiMAN features and how to activate them on the SZ300 LiMAN Features SZ300 Online (Connected to the Internet) SZ300 Offline (Disconnected from the Internet) • Register SZ300 controllers, licenses, support entitlement • Add capacity licenses to SZ300 controllers • Remove licenses from one SZ300 and add to another No action required. The SZ300 syncs with LiMAN automatically within 24 hours and applies the appropriate licenses. Three steps required: 1. Download the license file from LiMAN. 2. Log on to the SZ300, and then upload the license file from LiMAN. 3. Download the license response file from the SZ300, and then upload it to LiMAN. Warning Message for Missing AP Support Capacity License Starting in SmartZone release 3.2, the feature “Warning Message” is introduced to notify you if Support for AP Capacity Licenses has not been purchased. This is a warning only in SmartZone 3.2 with full enforcement occurring in a later release. This warning will only be displayed when you try to upgrade to a release beyond SZ 3.2 (i.e. SZ 3.2.1). The message is purely informational and does not affect your ability to upgrade nor does it impact your service in any way. In order to upgrade your network, without any warning messages, you will need to have both a Controller Support Contract and Support on the AP Licenses as well. For more information on purchasing of a Support for AP License, contact your Wireless Sales representative. Before You Begin Before deploying RUCKUS products, ensure that the following points are observed : • Installation must be done by a trained personnel • Ensure that the power source is easily accessible. • CAUTION! To avoid shock hazard, turn off all power sources before connecting the equipment. • The equipment is intended for use only in restricted access area and is not suitable for use in locations where children are likely to be present. • Release Notes and other user documentation are available at https://support.ruckuswireless.com. • Software upgrades are available at https:// support.ruckuswireless.com/software. • Software license and limited warranty information are available at https://support.ruckuswireless.com/warranty. Safeguard Symbols While operating the device, the operator must be aware of the following symbols to avoid undesirable consequences. TABLE 2 Safeguard Symbols Symbol Description Indicates frame or chassis earthing. Indicates that caution is necessary when operating the device or control close to where the symbol is placed. Indicates risk of electric shock. Indicates that all power sources must be disconnected before servicing or to avoid electric shock. Copyright © 2021 CommScope, Inc. All rights reserved. Page 1 of 5 Published January 2021, Part Number 800-72217-001 Rev J