Comnet FVT4014SHR Manuals

INS_FVT/FVR8018SHR_REVA 11/14/11 PAGE 1 INSTALLATION AND OPERATION MANUAL FVT/FVR8018(M)(S)1SHR 8-Channel 10-bit digitalLY encoded video + 8-Channel bi-directional data + Self-Healing Ring Topologies The FVT/FVR8018SHR are part of ComNet’s SHR product family. The FVT8018SHR transmits eight channels of video and eight channels of bi-directional data over its two fiber optic interfaces. The FVR8018SHR receives eight channels of video and eight channels of bi-directional data over its two fiber optic interfaces. The FVT/FVR8018SHR are fully compatible with the other products in ComNet’s SHR product family (e.g. FVT/FVR1010SHR and FVT/FVR4014SHR). The NTSC or PAL video signals are digitized with 10-bits of resolution providing superior image quality. The link also transmits bi-directional data over the same fiber. Each data channel can be configured for an electrical interface of RS232, RS422 or RS485 (2 Wire or 4 Wire). Utilizing wave division multiplexing (WDM) technology, only one optical fiber is required between units. It’s possible to implement a fully self-healing ring, linear add-drop, and even point-to-point topologies. A maximum of eight (8) video signals can be placed onto the ring through any combination of transmitter units, and an unlimited number of receiver units can be used to view any or all of these eight video signals. Bi-Color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status including the location of fiber breaks. See Figure 10 on Page 7 for an explanation of LED indicators. An alarm relay output on the FVR8018SHR indicates when a fault has occurred anywhere in the system. These units are interchangeable between stand-alone or card-cage mount configurations. See Figure A on Page 11 for mounting instructions. See Figures 1 – 13 for complete installation information. Install fiber and power up receiving modem prior to power up of FVT8018SHR !