Congatec XTX conga-XLX Manuals

XTX™ conga-XLX AMD Geode™ LX processors with an AMD Geode™ CS5536 companion device User's Guide Revision 1.2 Revision History Revision Date (dd.mm.yy) Author Changes 1.0 20.02.06 GDA Initial release 1.1 20.09.06 GDA Updated Power Consumption Tables in section 1.5. Added CMOS backup battery information. Updated heatspreader drawing. Added section 5.3.1 Simplified Overview of BIOS Setup Data Backup. Added Note and Caution statement found below PCI Signal Description Table 4 in section 6.1. Updated BIOS Setup Description section section 8. 1.2 06.08.07 GDA Added Electrostatic Sensitive Device information. Changed all audio codec references to ALC203. ALC658 is no longer used on conga-XLX. Added section 1.4 Electrical Characteristics and 1.4.1 Supply Voltage Ripple. Added description for PP_TPM pin 60 on X2 connector. Added information about center mounting hole to 'Caution' statement in section 3 Heatspreader. Added information to 'Caution' statement in section 4.1.4 Onboard Generated Supply Voltage. Added note about floppy cable to section 4.3.6 Parallel Port/Floppy Interface. Added section 5.5 'congatec Battery Management Interface'. Added LVDS signal mapping to table 17 LVDS Interface Pinout. Updated section 7 System Resources and section 8 BIOS Setup Description. Copyright © 2006 congatec AG X800m12 2/72 Preface This user's guide provides information about the components, features, connectors and BIOS Setup menus available on the conga-XLX. It is one of four documents that should be referred to when designing an XTXTM application. The other reference documents that should be used include the following: XTX™ Design Guide XTX™ Specification ETX® Design Guide The links to these documents can be found on the congatec AG website at www.congatec.com Disclaimer The information contained within this user's guide, including but not limited to any product specification, is subject to change without notice. congatec AG provides no warranty with regard to this user's guide or any other information contained herein and hereby expressly disclaims any implied warranties of merchantability or fitness for any particular purpose with regard to any of the foregoing. congatec AG assumes no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user's guide. In no event shall congatec AG be liable for any incidental, consequential, special, or exemplary damages, whether based on tort, contract or otherwise, arising out of or in connection with this user's guide or any other information contained herein or the use thereof. Intended Audience This user's guide is intended for technically qualified personnel. It is not intended for general audiences. Symbols The following symbols are used in this user's guide: Warning Warnings indicate conditions that, if not observed, can cause personal injury. Caution Cautions warn the user about how to prevent damage to hardware or loss of data. Note Notes call attention to important information that should be observed. Copyright © 2006 congatec AG X800m12 3/72